{{ name }}
Nr art. {{ combinedCodeWithHighlight }}
Nr własny produktu:
EAN / GTIN:
Numer producenta:
Nr katalogowy:
Malleable cast iron screw clamp TG-2K 120/60
Nr art.: TG12-2K
Nr własny produktu:
UWAGA:
Ten produkt jest zamawiany bezpośrednio u producenta i nie znajduje się w naszym magazynie – czas dostawy może być wydłużony.Ostateczna cena zostanie wyświetlona po dodaniu produktu do koszyka i przejściu do kasy.Produkt nie podlega zwrotowi.
InformacjeSzczegóły produktu
Dane techniczne
| Materiał nasadki ochronnej | z tworzywa sztucznego | |
| Rodzaj produktu | Ściski | |
| Rodzaj ścisku | ściski | |
| Zasięg maks. | 60 mm | |
| Maks. siła mocowania F | 6 000 N | |
| Rozstaw maks. a; b | 120 mm | |
| Materiał ramion napinających | żeliwo ciągliwe | |
| Grubość szyny ślizgowej | 5 mm | |
| Szerokość szyny ślizgowej | 20 mm | |
| Materiał szyny ślizgowej | stal | |
| Gwint wrzeciona | Gwint trapezowy | |
| Z płytą dociskową | tak | |
| Powierzchnie mocujące z osłoną | tak | |
| Zawartość | część pojedyncza |
Identyfikacja i klasyfikacja
| Numer artykułu | TG12-2K | |
| EAN / GTIN | 4008158031637 | |
| Numer producenta | TG12-2K | |
| Numer L | L80030 20 | |
| Producent/osoba odpowiedzialna | BESSEY Tool GmbH & Co. KG, Muehlenwieserstraße 40, 74321 Bietigheim-Bissingen, Deutschland, www.bessey.de |
Opis
Opis:
- Clamping force up to 6,000 N
- High‐quality 2‐component plastic handle
- Pressure plates can be replace by hand – no tools required (from 80 mm throat depth)
- With protective caps on the clamping surfaces
- Stable profiled rail with serration
- BESSEY anti‐slip system (from 80 mm throat depth)
Cecha szcz.:
- Overhead: 60 mm
- Material / surface:
- Upper and lower parts made of reinforced malleable cast iron, powder coated
- Hollow profile rail made of steel, cold drawn, galvanized
- Spindle with trapezoidal thread made of steel rolled, burnished
- Handle made of 2-component plastic
- Pressure plate made of steel, cold pressed, galvanized
- Plastic protective caps
- Rail: 20x5 mm
- Wingspan: 120 mm
Zaleta:
Integrated BESSEY anti-slip system
- Maximum safety is available with the integrated BESSEY anti-slip system, when clamping with a throat depth of 80 mm or more. A set screw that is molded into the sliding arm interlocks with the serration on the rail. This effectively prevents the clamp from dislodging or slipping away.
- Both the upper and lower sections are produced from high-quality malleable iron and reinforced by shafts. The powder coating protects against corrosion and the characteristic shaft profile works as a reliable reinforcement against torsion forces.
- The BESSEY profiled rail from our own drawing plant has been especially optimised for clamps. The serration on six faces additionally prevents the clamp from slipping.
- For enhanced serviceability the pressure plate can be changed with no need for tools. It can be replaced very easily and quickly.
Zastosowanie:
- Interior fittings
- Shell construction
- DIY
- Furniture and joinery works
- Kitchen construction and shop fitting
- Carpentry and woodwork
- Powerful and rigid clamping
Wskazówka:
- Danger warnings:
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Care instructions:
- Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
- Clean the rails with solvent
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents
- Clean the fluting on the rails with a steel brush
- Clean and oil the spindle regularly
- If the lower part slips, turn the grub screw a 1/4 turn further (TG, KRE, KREV only)
- Clean and oil the pressure plate regularly