• Szanowni Klienci, z powodu prac konserwacyjnych eShop będzie niedostępny w sobotę, 23 maja, w godzinach od 7:00 do 15:00. Przepraszamy za wszelkie niedogodności.

LUKAS SKWRS universal cylindrical round nose abrasive cap 5x11 mm special aluminium oxide grain 150

Nr art.: A21020052150
Cena za 1 Sztuka
plus podatek VAT w obowiązującej wysokości Ceny plus koszty dostawy
Indywidualne ceny dla klientów biznesowych po zalogowaniu.
  • Minimalna ilość zamówienia 100 Sztuka
  • Etapy zamówienia: 100 Sztuka
na zamówienie
Szacowany czas dostawy: 1-2 tygodnie
0 sztuk w magazynie

Wybierz rozmiar artykułu i ilość

Cena za 1 Sztuka (z VAT)

Dostępność

UWAGA:
Ten produkt jest zamawiany bezpośrednio u producenta i nie znajduje się w naszym magazynie – czas dostawy może być wydłużony.Ostateczna cena zostanie wyświetlona po dodaniu produktu do koszyka i przejściu do kasy.Produkt nie podlega zwrotowi. Informacje

Dodaj do listy artykułów

Udostępnij ten produkt

lub skopiować ten link

Szczegóły produktu

Dane techniczne

Oznaczenie producenta SKWRS
Opakowanie karton
Kolor Turkusowy

Identyfikacja i klasyfikacja

Numer artykułu A21020052150
EAN / GTIN 4027497247127
Numer producenta A21020052150
Numer L L50470 3
Producent/osoba odpowiedzialna LUKAS-ERZETT Vereinigte Schleif- und Fräswerkzeugf, Gebrüder-Lukas-Straße 1, 51766 Engelskirchen, Deutschland, www.lukas-erzett.de

Opis

Opis:

  • This efficient and extremely powerful flap disc with crescent flaps and ceramic grain is the perfect and greatly improved alternative to grinding discs or conventional flap discs. It is perfect for deburring, fettling, derusting, smoothening and weld seam machining. Compared to grinding discs, the LUKAS patented flap shape and arrangement provides for 50% lower noise levels, less vibration, faster operation, greater efficiency and better surface results. The flat position of the optimally bonded flaps not only makes for safer working, but also cuts down the tool wear. The abrasive grain adheres particularly firmly to its backing and is optimally used. A particularly large concentration of abrasive grains on the outer perimeter results in an exceptionally high removal rate per minute. Excellent removal rates and an exceedingly long tool life are guaranteed. Thanks to its multi-layer abrasive coating, this lamellar flap disc stays just as sharp as at the first time of use. When the top flaps wear down, the fresh abrasive coating of the flaps underneath is exposed. In this way, they achieve a long service life and consistent working quality. Thanks to the self-sharpening effect of the innovative ceramic abrasive grain, the flap disc always stays perfectly sharp. During use, ceramic particles break off and make space for new ones with sharp cutting edges. Tool replacement is significantly reduced – lowering tool costs. Hardened surfaces, wear-resistant steels, scale and hard coatings, titanium alloys and reinforced weld seams are no problems and can be machined quickly. Thanks to its 22.23 mm bore, this flap disc can be used with any commercially available angle grinder. The steel carrier of this flap disc is only available from LUKAS. The stable and robust carrier offers maximum reliability (no breakage) and is therefore also suitable for use with robot systems. The good heat dissipation also ensures cool grinding and practically eliminates the need for reworking. A high-quality resin system prevents this tool from rupturing at high speeds or working temperatures. Regular testing ensures a high degree of reliability. In addition, we pay attention to environmental conservation during the production and use start-of-the-art technologies with short curing times.

Cecha szcz.:

  • Tool shape: straight
  • Grain size: 40
  • n max.: 13300 (1/min)
  • Product packaging: Box
  • Lamellar flap disc type: SLTT – iQ series
  • Abrasive: ZK (zirconia alumina)
  • Safety standard: EN 13743
  • V max.: 80 m/s
  • Packaging labelling: LUKAS-ERZETT
  • Tool holder: Bore
  • Tool holder dimension: 22.23 mm
  • Tool diameter: 115 mm

Zaleta:

  • Save time: This tool can be mounted directly on the machine spindle or a suitable shank with external thread. No additional tool required.
  • The tool's small resin core with M14 thread enables a large flap projection. This makes the grinding disc flexible, it can adapt itself to uneven surfaces, and requires little effort when working. With its long tool life, it is ideally suitable for fillet weld grinding. There is no risk of the workpiece being damaged by the carrier.
  • Thanks to the multi-layer coating, this tool is always as sharp as at the first time of use. When the top flaps wear down, the fresh abrasive coating of the flaps underneath is exposed. In this way, they achieve a long service life and consistent working quality.
  • The abrasive surface layer of the abrasive cloth makes it easier for you to work with it. Thanks to the cool grinding, blue discolouration and glazing are a thing of the past.
  • A high-quality resin system prevents this tool from rupturing at high speeds or working temperatures. In addition, we pay attention to environmental conservation during the production and use start-of-the-art technologies with short curing times.
  • Due to the self-sharpening effect of the zirconium oxide, combined with a high hardness and sharpness of the abrasive grain, this tool achieves high removal rates and a long service life, especially on hard and tough materials such as stainless steel.

Zastosowanie:

  • Steel and cast steel: suitable
  • Alloyed/Quenched and tempered steels: suitable
  • Tool steels: suitable

Materiał:

  • Steel
  • Plastic and wood
  • Stainless steel
  • Cast iron
  • Aluminum

Pasuje do:

  • chamfering: suitable
  • Deburring: suitable
  • Rough grinding: suitable
  • Weld seam dressing: suitable
  • Milling: -
  • Engraving: -
  • Finishing of castings: -
  • Fillet weld grinding: suitable
  • Remove varnish: -
  • Polishing: -
  • Precision machining: -
  • Cleaning: -
  • Burnishing: -

Wskazówka:

  • High-quality combination of aluminium oxide types for efficiently grinding unhardened tool steels
  • perfect dimensional stability: Fits perfectly in the power tool
  • Abrasive combination made from extremely tough and rough grits for high removal and a good surface finish
  • Stainless thanks to zinc-nickel coating
  • No dangerous shank breakage thanks to high-quality steel shank
  • Without chrome coating
  • Tested quality: high level of safety through regular testing

Pliki do pobrania i dokumenty

Odpowiednie produkty

Doradcy ds. usług i produktów

Ulotki

If you see this, something went wrong, or you disabled javascript

Formularze

If you see this, something went wrong, or you disabled javascript

Promocje

If you see this, something went wrong, or you disabled javascript

Zaloguj się

Nie masz jeszcze konta w eShop?

Logowanie

Twoja osoba kontaktowa

Ustal prowizję

Karta klienta

Prosimy o okazanie kodu QR przy kasie.
Pobrano w dniu 

W koszyku

Do koszyka
Do koszyka