{{ name }}
Nr art. {{ combinedCodeWithHighlight }}
Nr własny produktu:
EAN / GTIN:
Numer producenta:
Nr katalogowy:
LUKAS SP pointed tree mounted point for steel/cast steel 10x20 mm shank 6 mm aluminium oxide grain 60
Nr art.: A200201020602
Nr własny produktu:
UWAGA:
Ten produkt jest zamawiany bezpośrednio u producenta i nie znajduje się w naszym magazynie – czas dostawy może być wydłużony.Ostateczna cena zostanie wyświetlona po dodaniu produktu do koszyka i przejściu do kasy.Produkt nie podlega zwrotowi.
InformacjeSzczegóły produktu
Dane techniczne
| Oznaczenie producenta | LUKAS Schleifstift SP Spitzbogenform für Stahl/Stahlguss 10x20 mm Schaft 6 mm Edelkorund Korn 60 | |
| Opakowanie | luzem | |
| Opis formy | Kształt stożka | |
| Średnica głowica | 10 mm | |
| Długość główki | 20 mm | |
| Średnica trzonka | 6 mm | |
| Długość chwytu | 40 mm | |
| Uchwyt | Chwyt | |
| Rodzaj produktu | Ściernica trzpieniowa | |
| Rozmiar ziarna (siatka) | 60 siateczka | |
| Do materiału | stal; Staliwo | |
| Grupa materiałów | metalowe | |
| Możliwość użycia do | Zeszlifowanie | |
| Norma | EN 12413 |
Identyfikacja i klasyfikacja
| Numer artykułu | A200201020602 | |
| EAN / GTIN | 4027497013975 | |
| Numer producenta | A200201020602 | |
| Numer L | L50280 199 | |
| Producent/osoba odpowiedzialna | LUKAS-ERZETT Vereinigte Schleif- und Fräswerkzeugf, Gebrüder-Lukas-Straße 1, 51766 Engelskirchen, Deutschland, www.lukas-erzett.de |
Opis
Opis:
- Top-Features:
- Lightweight carrier material for low tool weight
- Maximum tool life thanks to multi-layer abrasive coating
- Self-sharpening effect: high removal rate especially on stainless steel
- High safety: unbreakable glass-fibre
- Fresh abrasive coating every time: wear exposes the flaps underneath
- With rectangular flaps for a very good value for money
- Secure working even at high operating speeds and temperature thanks to special resin bond
- Extremely hard and sharp for an impressively long tool life
- Elastic carrier material: low vibration when working
- Environmentally friendly production using state-of-the-art resin curing technology
- Also machines hard materials efficiently
- A glass fibre carrier facilitates an exceptional surface result thanks to its flexibility
- Made with top-selling carrier
- Inexpensive to purchase
- Can be used with any commercially available angle grinder thanks to 22.23 mm bore Benefits:
- The flexible, lightweight, stable and elastic glass fabric carrier of the tool allows for exceptional surface results. The high resistance to shredding and minimal vibration during operation, not to mention its easy handling, perfectly round off this tool.
- Thanks to the multi-layer coating, this tool is always as sharp as at the first time of use. When the top flaps wear down, the fresh abrasive coating of the flaps underneath is exposed. In this way, they achieve a long service life and consistent working quality.
- A high-quality resin system prevents this tool from rupturing at high speeds or working temperatures. In addition, we pay attention to environmental conservation during the production and use start-of-the-art technologies with short curing times.
- Thanks to the self-sharpening effect of the zirconia alumina, combined with the extreme hardness and sharpness of the abrasive grain, this tool achieves high removal rates and a long service life, especially with hard and tough materials such as stainless steel.
Cecha szcz.:
- Mould: Cone
- Bonding: V13
- Type of bonding: V Ceramic bond
- Hardness: M
- Grit size: Cereal combinations
- Product packaging: bag
- Shank length: 40 mm
- Abrasive media: HK
- safety standard: EN 12413
- Packaging labelling: LUKAS-ERZETT
- Toolholder: Shank
- Tool holder dimensions: 6 mm
- Tool width / length / height: 63 mm
- Tool diameter: 22 mm
Zaleta:
- The flexible, lightweight, stable and elastic glass fabric carrier of the tool allows for exceptional surface results. The high resistance to shredding and minimal vibration during operation, not to mention its easy handling, perfectly round off this tool.
- Thanks to the multi-layer coating, this tool is always as sharp as at the first time of use. When the top flaps wear down, the fresh abrasive coating of the flaps underneath is exposed. In this way, they achieve a long service life and consistent working quality.
- The flat position of the optimally bonded flaps not only makes for safer working, but also cuts down the tool wear. The abrasive grain adheres particularly firmly to its backing and is optimally used. A particularly large concentration of abrasive grains on the outer perimeter results in an exceptionally high removal rate per minute. Outstanding removal rates are guaranteed.
- The abrasive surface layer of the abrasive cloth makes it easier for you to work with it. Thanks to the cool grinding, blue discolouration and glazing are a thing of the past.
- A high-quality resin system prevents this tool from rupturing at high speeds or working temperatures. In addition, we pay attention to environmental conservation during the production and use start-of-the-art technologies with short curing times.
- Due to the self-sharpening effect of the zirconium oxide, combined with a high hardness and sharpness of the abrasive grain, this tool achieves high removal rates and a long service life, especially on hard and tough materials such as stainless steel.
- The flat position of the optimally bonded sickle lamellae not only enables increased work safety, but also restricts the wear of the tool. The abrasive grit adheres particularly firmly to its base and is used optimally. There are particularly many abrasive grains in the outside of the tool, which results in particularly high Pro minute removal. Excellent removal is guaranteed.
Zastosowanie:
- Steel and cast steel: suitable
- Alloyed/Quenched and tempered steels: suitable
- Tool steels: suitable
- Stainless steel and cast steel: suitable
- Cast iron: suitable
- Aluminium, magnesium and copper alloys: suitable
- Titanium and nickel alloys: suitable
- Plastic/wood/rubber: suitable
Materiał:
- Steel
- Plastic and wood
- Cast iron
Wskazówka:
- No tool breakage thanks to robust steel carrier plate
- Maximum tool life thanks to multi-layer abrasive coating
- cost-effective by maximum usage of the entire abrasive coating thanks to specially shaped flaps
- No blue discolouration means less reworking
- Self-sharpening effect: high removal rate especially on stainless steel
- No blue discolouration thanks to optimised heat dissipation: less reworking needed
- Fresh abrasive coating every time: wear exposes the flaps underneath
- More abrasive grains in the outer area for a high grinding speed
- Finished faster thanks to the highest removal rate
- Secure working even at high operating speeds and temperature thanks to special resin bond