{{ name }}
Nr art. {{ combinedCodeWithHighlight }}
Nr własny produktu:
EAN / GTIN:
Numer producenta:
Nr kat.:
Tyrolit laboratory cut-off wheel 350x2,5x32 mm A60 J5 B PREMIUM steel/inox
Nr art.: 597383
Nr własny produktu:
UWAGA:
Ten produkt jest zamawiany bezpośrednio u producenta i nie znajduje się w naszym magazynie – czas dostawy może być wydłużony.Ostateczna cena zostanie wyświetlona po dodaniu produktu do koszyka i przejściu do kasy.Produkt nie podlega zwrotowi.
InformacjeSzczegóły produktu
Dane techniczne
| Rodzaj produktu | Cutting disc |
Identyfikacja i klasyfikacja
| Numer artykułu | 597383 | |
| EAN / GTIN | 9003175973835 | |
| Numer producenta | 597383 | |
| Numer L | L50140 520 | |
| Producent/osoba odpowiedzialna | Tyrolit AG, Swarovskistraße 33, 6130 Schwaz, Österreich, www.tyrolit.de |
Opis
Opis:
- Use PREMIUM laboratory cut-off wheels from Tyrolit to prevent structural changes, deformation of the workpiece or cracks when cutting samples in the laboratory.
- The laboratory cut-off wheels are perfectly suited for wet cutting of laboratory samples in various steel and stainless steel grades in travelling and chop cut.
- Highest performance values with significantly reduced tool wear characterize this product, which clearly optimizes your processes in terms of economy and efficiency.
Cecha szcz.:
- Max. working speed: 50m/s
- Max. RPM: 2750rpm
- Specification: 89A 60 J5 B17 /50
- Main dimension: D x T x H = 350 x 2,5 x 32
Zaleta:
- Cuts samples in a laboratory without structural alterations, workpiece deformation or cracks
- Maximum performance with greatly reduced tool wear
- Clean cutting quality
Zastosowanie:
- The workpiece must be fixed during machining and the wheel must not be exposed to lateral load
- Soft for 60.5-72.3 HRC
- Medium for 22.0-60.5 HRC
- Hard for 22.0 HRC
- Note maximum operating speed of 50 m/s
Materiał:
- Steel/Stainless steel
- Steel/Stainless steel
Pasuje do:
- Chop saw
Zalecenie:
- The workpiece must be fixed during machining and the wheel must not be exposed to lateral load
- Soft for 60.5-72.3 HRC
- Medium for 22.0-60.5 HRC
- Hard for 22.0 HRC
- Note maximum operating speed of 50 m/s
Wskazówka:
- For machining different steel and stainless steel grades
- For wet cutting laboratory samples using traverse and chop cuts