{{ name }}
Nr art. {{ combinedCodeWithHighlight }}
Nr własny produktu:
EAN / GTIN:
Numer producenta:
Nr kat.:
3-jaw puller with force-amplifying, self-centering, tensioning jaws, up to 200 mm spread, 200 mm reach
Nr art.: 483-4
Nr własny produktu:
UWAGA:
Ten produkt jest zamawiany bezpośrednio u producenta i nie znajduje się w naszym magazynie – czas dostawy może być wydłużony.Ostateczna cena zostanie wyświetlona po dodaniu produktu do koszyka i przejściu do kasy.Produkt nie podlega zwrotowi.
InformacjeSzczegóły produktu
Identyfikacja i klasyfikacja
| Numer artykułu | 483-4 | |
| EAN / GTIN | 4021176480584 | |
| Numer producenta | 483-4 | |
| Numer L | L80010 2161 | |
| Producent/osoba odpowiedzialna | Kleinbongartz & Kaiser oHG, Heinrich-Hertz-Straße 5, 40704 Hilden, Deutschland, www.kukko.com |
Opis
Opis:
- The handy 3-jaw puller with force-amplifying, self-centering, and straining jaws is used for pulling bearings, gears, and discs from tight and hard-to-reach spaces. This allows you to loosen any component that sits on a shaft and is freely accessible from the outside. The integrated force amplification with spring mechanism increases the clamping force proportionally to the pulling force. Tightening the spindle automatically centers the jaws. The 3-jaw design guarantees even load distribution and thus ensures a particularly secure grip on the part being pulled.
- Self-centering of the jaws through manual tightening of the spindle (Autogrip Technology)
- The slim design of the jaws enables access to difficult-to-reach areas.
Cecha szcz.:
- Material: tool steel
- Total width [mm]: 224 mm
- Total width [inch]: 8 13/16
- Total depth [mm]: 33 mm
- Total depth [inch]: 1 5/16
- Total height [mm]: 295 mm
- Total height [inch]: 11 5/8
- Width across flats [mm]: 17 mm
- Thread dimension: M16
- Span outside pull-off (max.) [inch]: 7 7/8
- Span outside pull-off (min.) [inch]: 3/4
- Span outside pull-off (max.) [mm]: 200 mm
- Clamping depth, external puller [mm]: 200 mm
- Clamping depth external puller [inch]: 7 7/8
- Hook root thickness at the tip (claw thickness K) [mm]: 3,5 mm
- Hook root thickness at the tip (claw thickness K) [inch]: 1/8
- Hook base width (claw width J) [mm]: 16 mm
- Hook base width (claw width J) [inch]: 5/8
- Hook base depth usable (claw depth usable O) [mm]: 12 mm
- Hook root depth usable (claw depth usable O) [inch]: 1/2
- Total hook root depth (total claw depth H) [mm]: 24 mm
- Total hook root depth (total claw depth H) [inch]: 15/16
- Total thickness of claws (L+1mm) [mm]: (distance of claws to base): 6 mm
- Total thickness of claws (L+1mm) [inch]: (distance of claws to base): 1/4
- Span inside pull-out (min.) [in.]: 3/4
- Max. torque [Nm]: 40 Nm
- Max. torque [ft lb]: 29.50
- Max. tensile force [kN]: 30 kN
- Max. tractive force [t]: 3 t
- Max. pulling force [US t. sh.]: 3.31
- Reversible puller hooks: No
- Quick adjustment available: No
- Clamping bracket: No
- Spare parts available: Yes
- Separation diameter (min. - max.) [mm]: 0 mm - 200 mm
- Can be sold worldwide: Yes (REACH, RoHS, POP, PROP65, TSCA)