{{ name }}
Nr art. {{ combinedCodeWithHighlight }}
Nr własny produktu:
EAN / GTIN:
Numer producenta:
Nr katalogowy:
PFERD TOOLS Flexible shaft BW 7 DIN10/G22 without handpiece 25,000-11,000 RPM
Nr art.: 4007220428573
Nr własny produktu:
UWAGA:
Ten produkt jest zamawiany bezpośrednio u producenta i nie znajduje się w naszym magazynie – czas dostawy może być wydłużony.Ostateczna cena zostanie wyświetlona po dodaniu produktu do koszyka i przejściu do kasy.Produkt nie podlega zwrotowi.
InformacjeSzczegóły produktu
Identyfikacja i klasyfikacja
| Numer artykułu | 4007220428573 | |
| EAN / GTIN | 4007220428573 | |
| Numer producenta | 86200509 | |
| Producent/osoba odpowiedzialna | August Rueggeberg GmbH & Co. KG, Hauptstraße 13, 51709 Marienheide, Deutschland, www.pferd.com |
Opis
Wykonanie:
- Flexible shaft system 7
Opis:
- Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
- The flexible core consists of four to ten layers of wire, conforming to DIN 2076, and is specially designed for high-speed clockwise rotation.
- The coupling is securely press-fitted to the core.
- After approximately 100 operating hours, the core of the flexible shaft must be re-lubricated.
- The flexible casing consists of oil-resistant rubber; the interior being a flat steel spiral and the outside being solid rubber.
- The connection couplings are pressed on firmly and encased in a rubber sheath as reinforcement.
- ;Because of low noise emissions, continuous operation with little fatigue is possible.
- Exchangeable collets enable a wide range of tools to be mounted.
- The sliding coupling enables quick handpiece changes.
- Flexible shaft without handpiece.
Cecha szcz.:
- PFERD TOOLS type: BW 7 DIN10/G22 oHA
- Rotational speed range, from: 11000 RPM
- Rotational speed range, to: 25000 RPM
- Version: Flexible shaft system 7
- Width, metric: 18 mm
- Dia. drive-side coupling, metric: 30 mm
- Drive-side coupling, DIN: 10
- Handpiece-side coupling dia. metric: 22 mm
- Handpiece-side coupling G: 22
- Length, metric: 1589 mm
- Net weight: 1.25 kg
- Dia. drive-side coupling [mm]: 30
- Handpiece-side coupling dia. [mm]: 22
- Dia. external, metric: 18 mm
- Height: 18 mm
Zastosowanie:
- Recommendations for use: It is essential that the rotational speed and power output do not fall below or exceed the specified ranges. It is not possible to repair cores and flexible casings. We recommend replacement with pre-assembled new parts. When using flexible shafts, please ensure that the shafts are not bent beyond the specified radius of curvature. The smallest possible radius of curvature is given for each flexible shaft. The radius of curvature should not be smaller than 140 mm. For maintenance of the flexible shaft, PFERD TOOLS recommends the P-SET BW 7 maintenance set with flexible shaft grease FT 4.
W dostawie:
- Special lengths available on request.
- Cores and hoses with double-sided sliding coupling on request.