{{ name }}
Nr art. {{ combinedCodeWithHighlight }}
Nr własny produktu:
EAN / GTIN:
Numer producenta:
Nr kat.:
2- and 3-jaw Puller with reversible jaws, combination crossbar, up to 120 mm spread, 75 mm reach
Nr art.: 203-0
Nr własny produktu:
UWAGA:
Ten produkt jest zamawiany bezpośrednio u producenta i nie znajduje się w naszym magazynie – czas dostawy może być wydłużony.Ostateczna cena zostanie wyświetlona po dodaniu produktu do koszyka i przejściu do kasy.Produkt nie podlega zwrotowi.
InformacjeSzczegóły produktu
Identyfikacja i klasyfikacja
| Numer artykułu | 203-0 | |
| EAN / GTIN | 4021176027666 | |
| Numer producenta | 203-0 | |
| Numer L | L80010 1524 | |
| Producent/osoba odpowiedzialna | Kleinbongartz & Kaiser oHG, Heinrich-Hertz-Straße 5, 40704 Hilden, Deutschland, www.kukko.com |
Opis
Opis:
- The 2-jaw and 3-jaw puller with crossbar features oscillating and reversible jaws and is used for centric pulling of bearings, gears, and disks in all common sizes for craft, workshop, and industry. This allows for the removal of any component that sits on a shaft and is freely accessible from the outside. The swiveling jaws with adjustable spread are applicable on both sides. Depending on the design, the claw shape varies. Thanks to the crossbar, the puller can be used as both a 2-jaw and 3-jaw tool. The 3-jaw configuration ensures an even load distribution and thus a particularly secure grip on the part being extracted.
- Thanks to the combination crossbar, the puller can be used for 2-jaw and 3-jaw pulling.
- Adjustable and 180° rotatable puller jaws for individual adaptation of the reach.
Cecha szcz.:
- Material: tool steel
- Total width [mm]: 132 mm
- Total width [inch]: 5 3/16
- Total depth [mm]: 132 mm
- Total depth [inch]: 5 3/16
- Total height [mm]: 105 mm
- Total height [inch]: 4 1/8
- Width across flats [mm]: 13 mm
- Thread dimension: M12 x 1,5
- Span outside pull-off (max.) [inch]: 4 3/4
- Span outside pull-off (min.) [inch]: 5/8
- Span outside pull-off (max.) [mm]: 120 mm
- Clamping depth, external puller [mm]: 75 mm
- Clamping depth external puller [inch]: 3
- Hook root thickness at the tip (claw thickness K) [mm]: 3 mm
- Hook root thickness at the tip (claw thickness K) [inch]: 1/8
- Hook base width (claw width J) [mm]: 11 mm
- Hook base width (claw width J) [inch]: 7/16
- Hook base depth usable (claw depth usable O) [mm]: 8 mm
- Hook root depth usable (claw depth usable O) [inch]: 5/16
- Total hook root depth (total claw depth H) [mm]: 14 mm
- Total hook root depth (total claw depth H) [inch]: 5/8
- Total thickness of claws (L+1mm) [mm]: (distance of claws to base): 6 mm
- Total thickness of claws (L+1mm) [inch]: (distance of claws to base): 1/4
- Span inside pull-out (min.) [mm]: 45 mm
- Span inside pull-out (min.) [in.]: 1 3/4
- Max. torque [Nm]: 25 Nm
- Max. torque [ft lb]: 18.44
- Max. tensile force [kN]: 15 kN
- Max. tractive force [t]: 1,5 t
- Max. pulling force [US t. sh.]: 1.65
- Reversible puller hooks: Yes
- Quick adjustment available: No
- Clamping bracket: No
- Claw end with slit: No
- Spare parts available: Yes
- Separation diameter (min. - max.) [mm]: 0 mm - 120 mm
- Span inside pull-out (min. - max.) [mm]: 45 mm
- Number of clamping depth adjustment: 1
- Can be sold worldwide: Yes (REACH, RoHS, POP, PROP65, TSCA)