{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master TM plain shank thread mill with countersink 1.5×D, AlTiN, M: M4
Article no.: 139666 M4
Copy
Article code:
Copy
- Thread type: M; M-LH; EG-M; EG-M-LH
- Flank angle: 60
- Tool material: Solid carbide
- Thread standard: DIN 13
- Shank: DIN 6535 HA to h6
Product details
Technical Data
| Thread size | M4 | |
| Coating | AlTiN | |
| Thread type | M; M-LH; EG-M; EG-M-LH | |
| Flank angle | 60 degrees | |
| Tool material | Solid carbide | |
| Thread standard | DIN 13 | |
| Shank | DIN 6535 HA to h6 | |
| Thread pitch | 0.7 mm | |
| Nominal ⌀ DC | 3.1 mm | |
| Flute length Lc | 6.63 mm | |
| Shank length Ls | 39.4 mm | |
| Overall length L | 58 mm | |
| Shank ⌀ Ds | 6 mm | |
| Neck ⌀ D1 | 5 mm | |
| Programming value for countersink L1 | 7.33 mm | |
| Through-coolant | yes | |
| No. of teeth Z | 4 | |
| Application for type of drilling | up to 1.5×D for blind holes; up to 1.5×D for through holes | |
| Spacing of the cutters | unequal spacing | |
| Countersink angle | 90 degrees | |
| Feed fz in steel < 750 N/mm2 | 0.02 mm | |
| Thread profile | Full profile | |
| Thread ⌀ | 4 mm | |
| Shank tolerance | h6 | |
| Number of clamping slots | 4 | |
| Colour ring | green | |
| Internal/external application | Internal | |
| Thread depth | 6.63 mm | |
| Series | Master TM | |
| Type of product | thread milling cutter |
Identification & Classification
| Article number |
139666 M4
Copy |
|
| EAN / GTIN |
4067263126768
Copy |
|
| Manufacturer number |
139666 M4
Copy |
|
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
suitable for / [m/min]
N
ISO code:
220
suitable for / [m/min]
N
ISO code:
220
suitable for / [m/min]
N
ISO code:
180
suitable for / [m/min]
P
ISO code:
140
suitable for / [m/min]
P
ISO code:
130
suitable for / [m/min]
P
ISO code:
120
suitable for / [m/min]
P
ISO code:
90
suitable for / [m/min]
P
ISO code:
80
suitable for / [m/min]
H
ISO code:
45
suitable for / [m/min]
H
ISO code:
85
suitable for / [m/min]
H
ISO code:
50
suitable for / [m/min]
M
ISO code:
82
suitable for / [m/min]
M
ISO code:
75
suitable for / [m/min]
S
ISO code:
50
suitable for / [m/min]
K
ISO code:
120
suitable for / [m/min]
N
ISO code:
200
suitable for / [m/min]
suitable for / [m/min]
suitable for / [m/min]
suitable for / [m/min]
Description
Version:
Solid carbide thread milling cutters with irregular cutting edge spacing and an increased number of cutting edges. Due to the irregular cutting edge spacing they achieve very smooth running and long tool life.
Newly developed universal geometry and high-performance coating for use across a wide spectrum of materials.
Newly developed universal geometry and high-performance coating for use across a wide spectrum of materials.
- Significantly reduced vibration due to irregular cutting edge spacing.
- Increased number of cutting edges.
- Latest-generation AlTiN-based HiPIMS coating.
- Corrected thread profile for avoidance of profile distortions.
Advantage:
Incorporating a countersink profile for a 90° countersink and thread milling in a single operation.