{{ name }}
Codice art. {{ combinedCodeWithHighlight }}
Codice materiale:
EAN / GTIN:
Codice del produttore:
Punta in HMI GARANT Master Steel FEED, codolo cilindrico DIN 6535 HA 10,01-X mm
Codice art.: 123235 10,01-X
Codice materiale:
- Materiale da taglio: HMI
- Norma: Norma interna
- Esecuzione: 12×D
- Tolleranza ⌀ nominale: h7
- Numero taglienti Z: 3
Dettagli prodotto
Dati tecnici
| Serie | MasterSteel | |
| ⌀ Campo | 10,01 mm - 12,00 mm | |
| Rivestimento | TiAlN | |
| Materiale da taglio | HMI | |
| Norma | Norma interna | |
| Esecuzione | 12×D | |
| Tolleranza ⌀ nominale | h7 | |
| Numero taglienti Z | 3 | |
| Angolo di affilatura | 140 grado | |
| Codolo | DIN 6535 HA con h6 | |
| Passaggio interno per LR | sì, con 25 bar | |
| Strategia di truciolatura | HPC | |
| Semi-standard | sì | |
| Lunghezza scanalatura per trucioli Lc | 156 mm | |
| Lunghezza complessiva L | 204 mm | |
| ⌀ Codolo Ds | 12 mm | |
| Colore collarino | verde | |
| Tipo di prodotto | Punta elicoidale |
Codice articolo e classificazioni
| Codice articolo | 123235 10,01-X | |
| EAN / GTIN | 4062406201401 |
Tabella dati
P
120
P
110
P
100
P
90
P
70
H
60
M
55
M
50
S
40
K
120
K
80
Descrizione
Version:
3-flute drill, specially developed for use at very high feed rates. Outstandingly suitable for machines with high installed power and stable operating conditions.
The sector-leading technology of the drill point guarantees optimum self-centring behaviour. 3 guide chamfers guarantee a stable exit from the hole and an exact roundness of the hole.
- Special cutter geometry with stable cutting edges and large clearance at the centre enables very high feed rates.
- The patented tip is optimised for chip flow and generates low cutting pressure with good chip breakage.
The sector-leading technology of the drill point guarantees optimum self-centring behaviour. 3 guide chamfers guarantee a stable exit from the hole and an exact roundness of the hole.
Note:
Flute length LC = L2 + 1.5 × DC.
For process reliability when using the 12×D drill, an initial centre drilling with an NC spotting drill No. 121130 with 155° point angle is necessary.
For process reliability when using the 12×D drill, an initial centre drilling with an NC spotting drill No. 121130 with 155° point angle is necessary.
Delivery time: 8 weeks
Minimum order quantity: 3 pcs.
Items made to order for a specific customer: Cancellation only up to a maximum of 3 working days after receipt of order acknowledgement. Items cannot be returned. We reserve the right to over or under deliver by +/-10% (min. 1 pc).
Minimum order quantity: 3 pcs.
Items made to order for a specific customer: Cancellation only up to a maximum of 3 working days after receipt of order acknowledgement. Items cannot be returned. We reserve the right to over or under deliver by +/-10% (min. 1 pc).