{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Torque screwdriver with scale, to take interchangeable blades, maximum torque: 1600cNm
Article no.: 659906 1600
Article code:
Product details
Technical Data
| Suitable interchangeable blade diameters | 8 mm | |
| Slipper function | yes | |
| Adjustable trigger value | adjustable | |
| Unit of measure for torque | Nm; cNm | |
| Min. torque, Nm | 3.2 | |
| Min. torque, cNm | 320 | |
| Max. torque, Nm | 16 | |
| Max. torque, cNm | 1,600 | |
| Setting the trigger value | with adjustment scale | |
| Bit holder, exchangeable blade | D 8 | |
| Unit of measure for scale graduations | cNm | |
| Scale graduation, 1 graduation | 25 cNm | |
| Data can be recorded | no | |
| Trigger principle | mechanical slip clutch | |
| Trigger signal | acoustic; haptic | |
| Feedback | triggering | |
| Content | single part | |
| Can be calibrated | yes | |
| Type of product | torque screwdriver | |
| Direction of tightening | right-hand | |
| Shape of connection | exchangeable blade | |
| Measurement technology | mechanical | |
| Measuring functions | torque | |
| DIsplay | analogue | |
| Torque range (min.) | 3.2 Nm | |
| Torque range (max.) | 16 Nm | |
| Torque accuracy clockwise | 6 % | |
| Manufacturer’s test certificate | yes | |
| Standard | DIN EN ISO 6789-1 | |
| Overall length | 126 mm | |
| Total weight | 194 g |
Identification & Classification
| Article number | 659906 1600 | |
| EAN / GTIN | 4045197611246 | |
| Manufacturer number | 659906 1600 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Power grip with comfortable easy-grip Haptoprene®® surface allows transmission of the required torque with no problems even with wet or oily hands. On reaching the set torque value, the screwdriver can be felt and heard to trigger and is then again immediately ready for use. The release torque is higher than the tightening torque (overload protection).
The desired torque is set using an adjustment wheel at the end of the handle. Putting the wheel into the locked position prevents inadvertent changes to the setting. Easy to read micrometer scale, protected against dirt.
The desired torque is set using an adjustment wheel at the end of the handle. Putting the wheel into the locked position prevents inadvertent changes to the setting. Easy to read micrometer scale, protected against dirt.
To take 8 mm interchangeable blades (No. 659870 − 659884). With pistol grip for delivering high torques.
Standard:
Tested to DIN EN ISO 6789.
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.