{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
SlimLine revolving lathe centre 60°/30°, Morse taper: 2
Article no.: 320643 2
Article code:
Product details
Technical Data
| Overall length L | 123 mm | |
| Head diameter D | 26 mm | |
| Type of centring point | tracking | |
| Point angle α | 30 degrees; 60 degrees | |
| Point length L3 | 21 mm | |
| Usable length L2 | 59 mm | |
| Mounting machine-side | MK2 | |
| With push-off thread | yes | |
| Draw-off nut included | yes | |
| Max. workpiece weight | 850 kg | |
| Maximum speed | 6,000 min-1 | |
| Maximum radial run-out | 0.005 mm | |
| Use | turning | |
| Weight | 0.23 kg | |
| Type of product | centring drill |
Identification & Classification
| Article number | 320643 2 | |
| EAN / GTIN | 4062406127268 | |
| Manufacturer number | 320643 2 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- Precision version with additional stiffness in the bearings.
- Precision roller bearings for high concentricity.
- Maintenance-free due to lifetime lubrication.
- Special seal prevents ingress of dirt and coolant.
- MT shank hardened and ground.
- With extended centre, point angle 60° / 30°.
- With push-off thread and push-off nut.
- outstandingly suitable for cutting threads and splining.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Advantage:
Push-off nut can be removed forwards thus eliminating any obstruction to the machining process.
Application:
Machining small and very small parts such as thread machining with optimum access to the flat face.
Supplied with:
Including draw-off nut.