{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Pair of gloves Pro Cut D / Protector, Glove size: 7
Article no.: 094603 7
Article code:
Product details
Technical Data
| Manufacturer’s designation | HOLEX Pro Cut D / Protector | |
| Contents pairs | 1 pair | |
| Cut protection class, EN 388 | D | |
| Version, EN 388 | EN388:2016 | |
| Resistance to abrasion | 4 | |
| Resistance to cuts (Coupe test) | X | |
| Tear propagation resistance | 4 | |
| Resistance to penetration | 3 | |
| Resistance to cuts (TDM) | D | |
| Impact protection | P | |
| Material of coating, the palms of the hands | nitrile foam; polyurethane (PU) | |
| EN 388 code | 4X43D | |
| Colour | grey; black | |
| Type of product | gloves | |
| Area of application | cut protection | |
| Glove size | 10; 11; 7; 8; 9; 10; 11; 7; 8; 9; 7 | |
| Accuracy of fit | fitting | |
| Scope of application | all-round | |
| Closure | elasticated band | |
| Version | five-fingered | |
| Reuse | reusable | |
| Unit | pair | |
| AQL (Accepted Quality Level) | G-II 1,0 for critical, G-II 2,5 for major, G-II 4,0 for Minor. | |
| Knitted technology (fineness) | 18G | |
| Standard | EN 388; EN ISO 21420 | |
| Backing material | HPPE fibre | |
| Coating | the palms of the hands | |
| Lined | no | |
| Characteristics | DMF free; nubs; protectors; reinforced crook of the thumb | |
| Protection category | II | |
| Overall length | 255 mm |
Identification & Classification
| Article number | 094603 7 | |
| EAN / GTIN | 4062406572181 | |
| Manufacturer number | 094603 7 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, www.hoffmann-group.com |
Description
Version:
HOLEX Pro Cut D. Seamless knitted cut-resistant gloves for precise and general-purpose activities and protection against high cut hazards. With PU nitrile foam coating and very good fit and dexterity. With reinforced thumb joint for longer life. Ideal for use in both dry and oily working conditions. 18 gauge knitted technology.
With additional protectors for the backs of the hands to protect against minor blows and impacts.
With additional protectors for the backs of the hands to protect against minor blows and impacts.
Standard:
EN 388; EN ISO 21420
Note:
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.
Warning:
Intended use
Reasonably foreseeable misuse
- For use in dry and slightly oily working environments.
- Optimum protection is obtained only when the area to be protected is completely covered. Where gloves have fastenings, check that these are securely closed. Protective gloves must not be allowed to slip. Select a suitable glove size.
- Protect hands against mechanical risks, abrasion, blisters, and other superficial injuries.
Reasonably foreseeable misuse
- Combination with other protective equipment must not impair the protective effect and must not hinder the wearer in his activities.
- Do not wear when close to rotating machine parts.
- Offers no protection against chemical, microbiological, thermal or electrical hazards.