Tool24 Smartline – upright cabinet fitted with tool sockets SK30

Article no.: 979101 SK30
plus VAT at the current rate Prices plus delivery costs
on request
Available in 6-8 weeks
0 pieces in stock
Forwarding delivery
Forwarding delivery

For bulky items, the final delivery costs will be calculated by our back office, depending on weight, size and delivery after completing your order. Your final bill could differ from your order confirmation e-mail.

Standard configurations usually have faster delivery times.

Select article variation and quantity

for tool shanks Unit price incl. VAT
  • Vertical pull-out frame load capacity: 600
  • Cabinet housing internal load capacity: 2,400
  • Drawer runner extension: Anti-tilt lock
  • Cylinder lock: modular lock barrel
  • Colour selection: RAL 9002, 7035, 7005, 7016, 6011, 5018, 5012, 5011, 5005, 3003

Add to shopping list

    Share this product

    or copy this link

    Product details

    Technical Data

    Vertical pull-out frame load capacity 600 kg
    Cabinet housing internal load capacity 2,400 kg
    Drawer runner extension Anti-tilt lock
    Cylinder lock modular lock barrel
    Colour selection RAL 9002, 7035, 7005, 7016, 6011, 5018, 5012, 5011, 5005, 3003
    Series Tool24 Smartline
    Height 2,000 mm
    Width 717 mm
    Depth 750 mm
    Pull-out frame drawers width 155 mm
    Vertical pull-out frame usable height 1,750 mm
    Number of pull-out frames 4
    Number of tool carriers No. 970130 24
    Number of tool sockets 408
    Axial spacing A 69 mm
    Weight 320 kg
    Type of product Tool issuing system

    Identification numbers & Classifications

    Article number 979101 SK30
    EAN / GTIN 4062406133955
    Manufacturer number 979101 SK30



    The pull-out shelves are supported from the base and equipped with central locking (can be used for emergency release). The end faces of the hot-dip galvanised frames of the pull-out shelves have holes at intervals of 37 mm for mounting tool stands, carrying rails, storage shelf trays, and perforated tool boards. The pull-out frames are equipped with an anti-tilt device. The pull-out frames open automatically. This ensures quick access to the tools.
    • Storage of pre-set tools.
    • Only for use in conjunction with a Tool24 Smartline Master Unit system.
    • Available with 14 different configurations (for different tool shanks SK, VDI, C, HSK).
    • Supplied with 24 carrier rails.
    • Mountings suitable for tool stands, support rails, shelf trays and perforated tool panels.
    • Distributed safe working load per pull-out frame: 600 kg.
    • Maximum upright cabinet load: 2400 kg.
    • Locking system for emergency release.


    Automatic industrial vending solution for storage and management of tools and C-items.


    Body RAL 7035 light grey, pull-out frames RAL 7016 anthracite powder-coated.


    Upright cabinets place increased demands on the floor, since the pull-out frames run directly on the floor! The following pre-requirements for the installation site must be satisfied absolutely by the customer:
    • Flatness tolerance for finished floors as per DIN 18202.
    • Angularity of a maximum of 2 millimetres over the measurement length of 1 metre.
    • The subsurface must have a sufficient load-bearing capacity.
    • Only place on ground that is absolutely level.
    The systems are prepared for wall or floor-mounting and must be secured against tilting.
    These upright cabinets can only be used in conjunction with a Tool24 Smartline Master Unit system No. 979001 S11M or No. 979001 S11M-EN, Tool24 PickOne Master Unit system No. 979201 DE or No. 979211 EN, and Tool24 Locker Master Unit system No. 979300 DE or No. 979310 EN.

    Downloads & documents

    Suitable products


    Spare parts


    If you see this, something went wrong, or you disabled javascript


    If you see this, something went wrong, or you disabled javascript


    If you see this, something went wrong, or you disabled javascript
    Direct purchase

    Sign in to your Account

    To shopping cart