Description:
The drive has a threaded tool mounting for tools with female threads or flange mounting. The exhaust air flow of the air grinder is at the back. Thanks to its flat angle head, the air grinder is suitable for working in hard-to-reach areas. It has a special spindle for holding all COMBIDISC tools (use a backing pad without shank). The drive has to be used with oil. 1 m exhaust hose and 2.5 m air supply hose with 1/4″ male threaded connection and threaded quick coupling (STGI), 1 key. The drive has a ring throttle version.
Feature:
- Operating pressure: 6.3 bar
- Power output: 230 Watt
- Rotational speed: 12000 RPM
- Throttle type: Ring
- Width, metric: 30 mm
- Air consumption, at idle: 0.55 m³/min
- Air consumption, under load: 0.45 m³/min
- Length, metric: 175 mm
- Number of oil drops [min]: 2 Tropfen
- Net weight: 0.476 kg
- Air supply hose internal dia.: 6 mm
- Dia. thread: 1/4-20 UNC
- Exhaust direction: rear
- Height: 36 mm
Advantage:
- The drive with a rotary valve can be used for longer periods of time.
- No dust turbulence on the workpiece side.
Note:
- The drive must be operated with the specified number of oil droplets in order to prevent premature malfunctioning.