Description:
Flat tungsten carbide files for working on flat and convex surfaces. These tungsten carbide files are delivered in industrial packaging without tungsten carbide file holders. Rectangular files, convex in transverse and longitudinal direction, cut on one side.
Feature:
- PFERD type: HMF 5010
- Chip breaker: without
- Teeth per cm: 10
- Width, metric: 5 mm
- Length, metric: 50 mm
- Height: 10 mm
Advantage:
- The best results thanks to radial and convex cut pattern.
Application:
Recommendations for use: Tungsten carbide files can be resharpened. Tungsten carbide files without chip breakers are suitable for achieving a very high surface quality.
Drive types: Manual application
Material:
- Materials that can be worked:
- Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
- Steel
- Steels up to 1,200 N/mm² (< 38 HRC)
- Materials that can be worked: Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Steel; Steels up to 1,200 N/mm² (< 38 HRC)
Suitable for:
Use carbide files without chipbreakers to achieve a very high surface quality.
Use carbide files with chip breakers to achieve high material removal.
Files made of carbide can be re-sharpened.
Note:
HMF 5010/1, HMF 13220/1: Rectangular files, crowned in transverse and longitudinal direction, with serration on one side.
HMF 5010/2, HMF 13220/2: Rectangular file, crowned in the transverse direction, with teeth on two sides, one of which has chipbreakers.
Please order carbide file holder (HMFH) separately.