{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
N° cat.:
Plaquette de coupe HiPer-Drill m7, HB3040, ⌀ D: 27mm
Réf.: 231645 27
Référence:
Détails du produit
Caractéristiques techniques
| Innenkühlung | nein | |
| Kühlschmierstoffeintritt | ohne Kühlschmierstoffeintritt | |
| Kühlschmierstoffaustritt | ohne Kühlschmierstoffaustritt | |
| Kühlschmierstoff | ja | |
| Serie | HiPer Drill | |
| Schneidendurchmesser min. | 27 mm | |
| Konfigurierbar | nein; nein | |
| Abstand Schneidenecke zu Schneidenspitze | 1,43 mm | |
| Anzahl Schneiden | 2 | |
| Spitzenwinkel | 160 Grad | |
| Schneidplattendicke | 9,7 mm | |
| für Grundelement Größe | 27 mm | |
| Schneidstoff | HM | |
| Schneidstoffe, Herstellerbezeichnung | HB3040 | |
| Beschichtung | TiAlN | |
| Sorte | HB3040 | |
| Auskraglänge | 24,7 mm | |
| Länge gesamt | 24,7 mm | |
| Funktionslänge | 0 mm | |
| Gewicht | 40 g | |
| Schneidrichtung | rechtsschneidend | |
| Norm | DIN4000-171 | |
| Bearbeitungsverfahren | Bohren ins Volle | |
| Produktart | Schneideinsatz zum Bohren | |
| Inhalt | Einzelteil |
Identification et classification
| Référence article | 231645 27 | |
| EAN / GTIN | 4062406163044 | |
| Réf. fabricant | 231645 27 | |
| Fabricant/personne responsable | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Tableau d’application
P
140
P
120
P
100
K
80
Description
Version:
Vee ground cutter inserts for precise positioning and stable seating.
Concentricity when assembled ≤ 20 µm. For holes up to IT9 accuracy.
Special pyramidal point geometry, optimal spot drilling – even with unstable conditions and long tool overhangs.
Such as when processing sheet metal and steel girders. Also suitable for stack drilling.
Concentricity when assembled ≤ 20 µm. For holes up to IT9 accuracy.
Special pyramidal point geometry, optimal spot drilling – even with unstable conditions and long tool overhangs.
Such as when processing sheet metal and steel girders. Also suitable for stack drilling.
Note:
Cutting data applies for the base body 5×D.
Drill pilot holes exclusively with cutter insert of the same type.
1×D maximum drilling depth without through-coolant.
Drill pilot holes exclusively with cutter insert of the same type.
1×D maximum drilling depth without through-coolant.