{{ name }}
Art.-nr. {{ combinedCodeWithHighlight }}
Sagsnummer:
EAN/GTIN:
Producentnummer:
Roterende pinol med hårdmetalindsats og aftrykningsmøtrik 5
Art.-nr.: 321250 5
Sagsnummer:
Produktdetaljer
Teknisk data
| Morsekonus | MK5 | |
| Hus-⌀ D | 90 mm | |
| Nyttelængde B | 129 mm | |
| Hårdmetal-⌀H | 18 mm | |
| Maksimal rundløbsfejl | 0,005 mm | |
| Til emnevægt | 1.000 kg | |
| Produkttype | Centrerspids |
Identifikationsnumre og klassifikationer
| Artikelnummer | 321250 5 | |
| EAN/GTIN | 4019208059655 | |
| Producentnummer | 221025 |
Betegnelse
Version:
- Tip angle 60°.
- With carbide tip for small centres and draw-off nut.
- Body and live centre are hardened (multiple regrinding possible).
- Precision roller bearings for high concentricity.
- Maintenance-free due to lifetime lubrication.
- Special seal prevents ingress of dirt and coolant.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Application:
For machining thin components at high speeds.