{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
ESD plug-in basic rack, Depth 400 mm, Height: 2000mm
Article no.: 972500 2000
Article code:
Product details
Technical Data
| Colour, grey | Light grey | |
| Number of shelves | 4 | |
| Width of storage shelf | 946 mm | |
| Height of storage shelf | 38 mm | |
| Frame profile | Rechteck-Stütze 50×25×1,25 mm | |
| ESD protected area (EPA) | yes | |
| Colour | grey | |
| Type of product | storage shelf | |
| Height adjustment interval | 40 mm | |
| Width of compartment | 900 mm | |
| Shelf load max. | 120 kg | |
| Bay load max. | 900 kg | |
| Type of installation | plug-in system | |
| Rack installation | basic rack | |
| Nominal depth | 400 mm | |
| Nominal height | 2,000 mm | |
| External dimension width | 1,000 mm |
Identification & Classification
| Article number | 972500 2000 | |
| EAN / GTIN | 4062406180744 | |
| Manufacturer number | 972500 2000 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Sturdy column frame of rectangular columns (50×25×1.25 mm) with slots at intervals of 40 mm for mounting cross beams / shelves. Column frames with non-conductive plastic end caps. No tools required for assembly. The high lateral stability eliminates the need for diagonal braces. Storage shelves are ESD powder-coated. A galvanised spring on the storage shelf ensure reliable contact with the installed earthing point.
With earthing pins welded on to the column frame. The conductivity of the earthing connection within the building must be checked by a qualified electrician.
With earthing pins welded on to the column frame. The conductivity of the earthing connection within the building must be checked by a qualified electrician.
Supplied with:
Includes ESD grounding cable.
Colour:
Light grey similar to RAL 7035 ESD powder-coated.
Note:
- To ensure the stability of the racking, measures to prevent tipping are necessary where the height to depth ratio is greater than 5:1.
- All plastic components (e.g. covering caps) are not ESD conductive.