{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Grid vacuum plate Venturi system, Type: VR1
Article no.: 384900 VR1
Article code:
- Version: Zero-point clamping system
Product details
Technical Data
| Length | 300 mm | |
| Width | 200 mm | |
| Height | 32.5 mm | |
| Intervals | 12.5 mm | |
| Version | Zero-point clamping system | |
| Type of product | Vacuum clamping plate |
Identification & Classification
| Article number | 384900 VR1 | |
| EAN / GTIN | 4062406256432 | |
| Manufacturer number | 384900 VR1 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Aluminium, steel blue anodised. Operating pressure 3.5 − 8 bar. The final vacuum is approx. 80 mbar (92 % vacuum). Integral noise muffler reduces the noise generation. Height tolerance ± 0.5 mm.
Supplied with 2 ZeroClamp holes, 12M10, pitch 200 mm.
Advantage:
Low-cost entry-level system. Low maintenance costs. Ready for immediate use.
Can quickly and easily be converted to vacuum pump operation.
Application:
For vacuum clamping without a vacuum pump.
Supplied with:
Back-stop discs, compressed air hose ⌀ 10 mm (1 m), Venturi nozzle (1 pc.).
Sealing cord ⌀ 4 mm (10 m).
Sealing cord ⌀ 4 mm (10 m).
Hose adaptor (1×), plug LW 12 (1×), stepless adjustable clamps (2×).
Note:
When using Venturi nozzles, we advise against machining using coolant emulsion.
Warning:
Intended use
Reasonably foreseeable misuse
Intended use
Reasonably foreseeable misuse
Intended use
Reasonably foreseeable misuse
- To clamp and secure workpieces with simple shapes and rough surfaces.
- suitable for 5-face machining, but no rotary or pivoting movement of the machine table permissible (restricted by hoses).
- For work in industrial environments.
- Use only when it is technically in good condition and safe to operate.
Reasonably foreseeable misuse
- Do not use in explosion hazard areas.
- Do not make any unauthorised modifications.
Intended use
- To clamp and secure workpieces with simple shapes and rough surfaces.
- suitable for 5-face machining, but no rotary or pivoting movement of the machine table permissible (restricted by hoses).
- For work in industrial environments.
- Use only when it is technically in good condition and safe to operate.
Reasonably foreseeable misuse
- Do not use in explosion hazard areas.
- Do not make any unauthorised modifications.
Intended use
- To clamp and secure workpieces with simple shapes and rough surfaces.
- For work in industrial environments.
- Use only when it is technically in good condition and safe to operate.
Reasonably foreseeable misuse
- Do not use in explosion hazard areas.
- Do not make any unauthorised modifications.