{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
GARANT Master Tap Alu machine tap for wire thread inserts, DLC, EG-M: EG-M2
Article no.: 133555 EG-M2
Copy
Article code:
Copy
- Thread type: EG-M
- Flank angle: 60
- Tool material: HSS E PM
- Standard: Works standard
- Tolerance class: 6HX mod.
Product details
Technical Data
| Coating | DLC | |
| Thread type | EG-M | |
| Flank angle | 60 degrees | |
| Tool material | HSS E PM | |
| Standard | Works standard | |
| Tolerance class | 6HX mod. | |
| Taper lead form | B | |
| Shank | Plain shank with h9 | |
| Through-coolant | no | |
| Application for type of drilling | up to 4×D for through holes | |
| Cutting direction | right-hand | |
| Thread pitch | 0.4 mm | |
| Overall length L | 55 mm | |
| Shank ⌀ Ds | 2.8 mm | |
| Shank square □ | 2.1 mm | |
| Tapping hole ⌀ | 2.15 mm | |
| Thread ⌀ | 2 mm | |
| Type of threading tool | Machine tap for dynamic machining | |
| Number of clamping slots | 2 | |
| Colour ring | yellow | |
| Number of cutting edges Z | 2 | |
| Thread depth | 8 mm | |
| Series | Master Tap | |
| Type of product | Taps |
Identification & Classification
| Article number |
133555 EG-M2
Copy |
|
| EAN / GTIN |
4067263829782
Copy |
|
| Manufacturer number |
133555 EG-M2
Copy |
|
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
suitable for / [m/min]
N
ISO code:
35
suitable for / [m/min]
N
ISO code:
32
suitable for / [m/min]
N
ISO code:
20
suitable for / [m/min]
N
ISO code:
20
suitable for / [m/min]
N
ISO code:
18
suitable for / [m/min]
N
ISO code:
18
suitable for / [m/min]
N
ISO code:
18
suitable for / [m/min]
N
ISO code:
25
suitable for / [m/min]
suitable for / [m/min]
suitable for / [m/min]
Description
Version:
High-performance tap, specially developed for aluminium and non-ferrous alloys. Extra-long flutes and neck length for usable thread depths up to 4×D.
- HSS-E-PM tool material for high cutting edge stability.
- Ultra-smooth DLC coating for wear resistance and avoidance of edge build-up.
- Extra-long flute geometry.
Application:
For production of EG mounting thread according to metric ISO thread DIN 8140 for STI wire thread inserts (Screw Thread Insert).
Note:
Please be sure to observe the correct tapping hole ⌀ (see table)!