{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Power Q mini high feed rate milling cutter with Weldon shank, for indexable inserts ANGX, ⌀ D / number of effective cutting edges Z: 16/2mm
Article no.: 213052 16/2
Copy
Article code:
Copy
- Milling application: Circular milling; Circular milling; Plunging
- Through-coolant: yes
- Machining strategy: HPC
- Tool exchange: PowerCard
Product details
Technical Data
| Series | Power Q | |
| Cutting edge ⌀ DC | 16 mm | |
| Number of cutting edges Z | 2 | |
| Shank type | Weldon shank | |
| Milling application | Circular milling; Circular milling; Plunging | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Tool exchange | PowerCard | |
| ⌀ D3 | 10 mm | |
| Overhang L1 | 30 mm | |
| Overall length Ltot | 100 mm | |
| Shank ⌀ Ds h6 | 16 mm | |
| Circular interpolation milling ⌀ Dmin | 26 mm | |
| Circular interpolation milling ⌀ Dmax | 30 mm | |
| Circular interpolation milling ap | 1 mm | |
| Ramping angle αmax | 2.39 degrees | |
| Ramping length L for αmax | 8.4 mm | |
| suitable indexable insert | ANGX10T308ZE.R | |
| Setting angle κ | 20 degrees | |
| Type of product | Copy mill |
Identification & Classification
| Article number |
213052 16/2
Copy |
|
| EAN / GTIN |
4062406566319
Copy |
|
| Manufacturer number |
213052 16/2
Copy |
|
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
High feed rate milling system for smaller machining diameters and greater operating depths. Particularly effective due to the large number of cutting edges.
Spare part:
Pack of insert screws No. 269028 18 (8IP; 1.2Nm).