{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Special pull stud S20×2, suitable for steep tapers: 40
Article no.: 308800 40
Copy
Article code:
Copy
Product details
Technical Data
| suitable for steep tapers | 40 | |
| Overall length L | 53 mm | |
| L1 | 25 mm | |
| Thread M | M16 | |
| Thread M1 | S20×2 | |
| maximum tightening torque | 50 Nm | |
| suitable for taper arbors with colour code | SK 40 | |
| Type of product | Pull Stud |
Identification & Classification
| Article number |
308800 40
Copy |
|
| EAN / GTIN |
4045197151094
Copy |
|
| Manufacturer number |
308800 40
Copy |
|
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Description:
The toolholder is securely pulled into the spindle by the spindle’s clamping gripper using the pull stud. Pull studs come in different versions. They are an important link between the machine and tool. Stringent requirements apply for the accuracy, strength and reliability of pull studs.
Note:
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.
When installing the pull stud, cheque the correct tightening torque.