{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
UniKlamp UK 300/80
Article no.: UK30
Article code:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Technical Data
| Series | UniKlamp | |
| Colour | grey; red; black | |
| Version | smooth | |
| Material of protective cap | plastic | |
| Type of product | clamps | |
| Type of clamp | Parallel clamp | |
| Min. reach | 80 mm | |
| Max. reach | 80 mm | |
| Max. clamping force | 1,500 N | |
| Capacity max. | 300 mm | |
| Min. spreading width | 172 mm | |
| Max. spreading width | 415 mm | |
| Material of clamping arms | plastic | |
| Thickness of slide rail | 5 mm | |
| Width of slide rails | 20 mm | |
| Material of slide rail | steel | |
| Spindle thread | trapezoidal thread | |
| Type of operation | two-handed | |
| Suitable for | wood | |
| With pressure pad | yes | |
| Shape of clamping face | rectangular | |
| Clamping faces with protective cap | yes | |
| Number | 1 pcs. | |
| Content | single part |
Identification & Classification
| Article number | UK30 | |
| EAN / GTIN | 4008158027203 | |
| Manufacturer number | UK30 | |
| L-Number | L80040 47 | |
| Manufacturer/responsible person | BESSEY Tool GmbH & Co. KG, Muehlenwieserstraße 40, 74321 Bietigheim-Bissingen, Germany, www.bessey.de |
Description
Description:
- Clamping force up to 1,500 N
- Parallel jaw faces with extra-large contact surfaces
- Clamping of various shapes, along the whole length of the rail
- Universally applicable
- Light and easy-to-handle
- No need for tools for switching between clamping and spreading
- On carded hang pack
Feature:
- Overhead: 80 mm
- Material / surface:
- Upper and lower part made of reinforced PA6 plastic with inserted sheet metal parts for reinforcement
- Hollow profile rail made of steel, cold drawn, galvanized
- Spindle with trapezoidal thread made of steel rolled, burnished
- Wooden handle, water-based lacquer
- Pressure plate made of steel, cold pressed, galvanized
- Rail: 20x5 mm
- Wingspan: 300 mm
- Spreading second: 172-415 mm
Advantage:
Parallel jaw faces
- The large, flat jaw faces made from impact‐ and fracture‐resistant reinforced polyamide are almost parallel. For gentle clamping of a very wide range of different shapes over the entire length of the rail, without spacers.
- The BESSEY hollow profile rail from our own drawing plant has been especially optimised for clamps. The profile acts as a reliable reinforcement against torsional forces, while the serration prevents the clamp from slipping.
- The end stop made from impact-resistant polyamide also gives the clamp added support. It can be removed without any tools, to allow the lower arm to be quickly turned around and used for spreading.
Application:
- Interior fittings
- DIY
- Furniture and joinery works
- Large-area clamping and spreading
Note:
- Danger warnings:
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Care instructions:
- Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
- Clean the rails with solvent
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents
- Clean the fluting on the rails with a steel brush
- Clean and oil the spindle regularly