{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Earth (ground) clamp LP 150/60
Article no.: LP-1
Copy
Article code:
Copy
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Technical Data
| Type of product | Clamp |
Identification & Classification
| Article number |
LP-1
Copy |
|
| EAN / GTIN |
4008158004907
Copy |
|
| Manufacturer number |
LP-1
Copy |
|
| L-Number |
L80030 255
Copy |
|
| Manufacturer/responsible person | BESSEY Tool GmbH & Co. KG, Muehlenwieserstraße 40, 74321 BIETIGHEIM-BISSINGEN, Germany, www.bessey.de |
Description
Description:
- With malleable cast iron arms
- Ergonomically shaped wood handle
- Grounding connection hole in the upper part
Feature:
- Overhead: 60 mm
- Hole Ø: Ø10,5 mm
- Material / surface:
- Upper and lower part made of reinforced malleable cast iron, galvanized
- Hollow profile rail made of steel, cold drawn, galvanized
- Spindle with trapezoidal thread made of steel rolled, burnished
- Wooden handle, water-based lacquer
- Pressure plate made of steel, cold pressed, galvanized
- Rail: 20x5 mm
- Wingspan: 150 mm
- Current: 300 A
Application:
- Metal construction
- Locksmith work
- Car body construction
- Earthing using ground clamps
Note:
- Danger warnings:
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Care instructions:
- Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
- Clean the rails with solvent
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents
- Clean the fluting on the rails with a steel brush
- Clean and oil the spindle regularly
- If the lower part slips, turn the grub screw a 1/4 turn further (TG, KRE, KREV only)
- Clean and oil the pressure plate regularly