{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
PFERD TOOLS Tungsten carbide high-performance burr CAST oval TRE dia. 12x20 mm shank dia. 6 mm for cast iron
Article no.: 4007220952467
Article code:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Technical Data
| Tool material | Carbide | |
| Machining group | K (cast iron) | |
| Coating | uncoated | |
| Cutter diameter | 12 mm | |
| Cutting edge length | 20 mm | |
| Tooth type, manufacturer-specific | CAST | |
| Twist direction | right-hand | |
| Burr shape | oval shape burr | |
| Overall length | 60 mm | |
| Max. speed | 20,000 min-1 | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | DIN 8032 | |
| Type of product | burr |
Identification & Classification
| Article number | 4007220952467 | |
| EAN / GTIN | 4007220952467 | |
| Manufacturer number | 21135183 | |
| L-Number | L51060 611 | |
| Manufacturer/responsible person | August Rueggeberg GmbH & Co. KG, Hauptstraße 13, 51709 Marienheide, Germany, www.pferd.com |
Description
Description:
- With the CAST cut, PFERD TOOLS has developed innovative burrs especially for work on cast iron.
- They are characterized by an extremely high stock removal rate on cast iron and impress through smooth milling with significantly reduced vibration and less noise.
- Oval burr according to DIN 8032.
- PFERD TOOLS ERGONOMICS recommends burrs with the CAST cut as an innovative tool solution for comfort when working, with significantly reduced vibration and less noise.
- PFERD TOOLS EFFICIENCY recommends burrs with the CAST cut for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible.
Feature:
- Radius corner design: 5 mm
- RPM from, grey cast iron, white cast iron: 12000 RPM
- RPM to, grey cast iron, white cast iron: 20000 RPM
- Cut: CAST
- Dia. external, metric: 12 mm
- Dia. shank, metric: 6 mm
- Length, cut: 20 mm
- Length, total: 60 mm
Advantage:
- Up to 100 % higher stock removal rate when used on cast iron due to the innovative tooth geometry, when compared with conventional cross-cut burrs.
- Tangibly more aggressive, large chips and very good chip removal.
- Comfortable working with reduced vibration and less noise.
- The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
Application:
- Recommendations for use: To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible. Observe the recommended rotational speeds. To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.
- Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams
- Drive types: Flexible shaft drive; Tool machine; Automated centres; Straight grinder
Material:
- Materials that can be worked:
- Annealed cast iron
- Black annealed cast iron (GTS, GJMB)
- Cast iron
- Grey/nodular cast iron (GG/GJL, GGG/GJS)
- White annealed cast iron (GTW, GJMW)
- Materials that can be worked: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Cast iron; Grey/nodular cast iron (GG/GJL, GGG/GJS); White annealed cast iron (GTW, GJMW)
Note:
- The very high stock removal rate can cause discolouration on the shank. This does not constitute a safety risk.