{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable drill toolholder VARIA VX3, VX3, Clamping range ⌀ D1: 16mm
Article no.: 319823 16
Article code:
Product details
Technical Data
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, axially concentric | |
| Cooling lubricant | yes | |
| Holder type | spindle head mounting | |
| Interface coding | EWC00300295 | |
| Holder version | dimensionless nominal size without cooling | |
| Holder size, no dimensions | 3 | |
| Type of mounting | hole (internal mounting) | |
| Shank length | 36.5 mm | |
| Interface on machine side | VX3 | |
| Min. clamping diameter | 16 mm | |
| Max. clamping diameter | 16 mm | |
| Gauge length | 28 mm | |
| External diameter, tool-end | 52 mm | |
| Body length (tool side) | 52 mm | |
| Tightening torque | 5.7 Nm | |
| With cooling channel bore | yes | |
| Interface | joint 1; joint 2 | |
| Type of product | side lock arbor | |
| Overall length | 64.5 mm | |
| Overall height | 48 mm | |
| Overall width | 48 mm | |
| Through-coolant available | yes | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 319823 16 | |
| EAN / GTIN | 2050001743688 | |
| Manufacturer number | S04919 | |
| Manufacturer/responsible person | EWS Weigele GmbH & Co. KG, Maybachstraße 1, 73066 Uhingen, Germany, www.ews-tools.de |
Description
Version:
VX − Three-point clamping of the integral segment ring, free of transverse forces. Polygon torque resistance up to 200 Nm.
Advantage:
- Quick change using a single clamping point, therefore tool change without risk of injury.
- Cutter tools lie pre-set at the machine.
- Compact design - low unit costs.
Application:
For clamping tools with drive flats.
Note:
Maximum tightening torque for VX3 and VX4 is 5.7 Nm, which can be achieved using the appropriate torque screwdriver No. 211750 size 5.7. Maximum tightening torque for V5 is 10 Nm. When releasing the deposits, do not travel beyond the stop.
Extra short version available on request. We recommend the EWS Clean and cleaning set for cleaning the Varia toolholders and replaceable inserts.
Extra short version available on request. We recommend the EWS Clean and cleaning set for cleaning the Varia toolholders and replaceable inserts.