Version:
Quick-change boring bar system.
For direct adaption the quick-change toolholder is screwed into the cylindrical clamping sleeve or VDI toolholder by a clamping nut with an external thread.
Application:
For internal machining with boring bars.
Suitable for:
Boring bars with 1, 2 or 3 drive flats.
Supplied with:
Blanking screws for cooling channel holes, blind nuts.
Note:
Pre-setting e.g. using GARANT No.
354760 VG1 or
355010 VGBASIC with reducer No.
354773 (sleeve No. 313291 size 25 with additional reducing adapter No.
319426;
319428 each in size 40/32).