{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
OZ collet for chuck, 2 ‑ 25 mm, Nominal clamping ⌀ d: 14mm
Article no.: 309550 14
Article code:
Product details
Technical Data
| Manufacturer’s designation | OZ-Spannzange fuer Futter 462 E | |
| Holder | OZ | |
| Clamping diameter | 14 mm | |
| Min. clamping diameter | 2 mm | |
| Max. clamping diameter | 25 mm | |
| External diameter | 35.05 mm | |
| Length of collet | 52 mm | |
| Shape | conical | |
| Standard | DIN ISO 10897 | |
| Material | steel | |
| Surface | ground; hardened | |
| Clamping profile | round | |
| With axial compensation | no | |
| With radial compensation | no | |
| Collet version | dead length collet | |
| With seal | no | |
| Through-coolant available | no | |
| With length adjustment | no | |
| Tool pull-out protection | no | |
| Type of product | collet | |
| Content | single part |
Identification & Classification
| Article number | 309550 14 | |
| EAN / GTIN | 2050001704597 | |
| Manufacturer number | 12202011400 | |
| Manufacturer/responsible person | Eugen Fahrion GmbH & Co. KG Präzisions-Spannwerkze, Forststraße 54, 73667 Kaisersbach, Germany, www.fahrion.de |
Description
Version:
Spring steel, through hardened and ground. The through bore (longer clamping range than DIN collets) increases the clamping force. More slits than DIN collets, giving a greater insertion depth in the collet chuck. Suitable for jobber drills, for clamping on the guide land Clamping range = Nominal size down to minus 0.5 mm. 5 or 6 slits each end.
Advantage:
- Better radial run-out = axially parallel centring in taper; no tumbling.
- Higher clamping force = due to improved grip.
- Higher system stiffness = suitable for high-speed milling.
- Longer tool life.