{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
ER collet, ER 40, Nominal clamping ⌀ d: 9mm
Article no.: 309043 9
Article code:
New product
Product details
Technical Data
| Holder type | Plain shank | |
| Holder version | metric | |
| Holder size, metric | 9 mm | |
| Shank diameter | 9 mm | |
| Holder | ER 40 | |
| Clamping diameter | 9 mm | |
| Min. clamping diameter | 8 mm | |
| Max. clamping diameter | 9 mm | |
| With cylindrical shoulder (face side) | no | |
| Shape | conical | |
| Taper angle | 16 degrees | |
| Standard | DIN 6499 | |
| Material | steel | |
| Surface | ground; hardened; polished | |
| With thread | no | |
| Clamping profile | round | |
| With axial compensation | no | |
| With radial compensation | no | |
| Collet version | dead length collet | |
| With seal | no | |
| Through-coolant available | no | |
| Tool pull-out protection | no | |
| Interface | joint 1; joint 2 | |
| Type of product | collet | |
| Content | single part |
Identification & Classification
| Article number | 309043 9 | |
| EAN / GTIN | 4069515025584 | |
| Manufacturer number | 309043 9 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Through hardened and ground. Polished.
Note:
The collet clamping ⌀ range is always up to 1 mm less than nominal, e.g. ⌀ 10 − 9 mm, except for ⌀ 1, 1.5 and 2 (where it is only 0.5 mm).