{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Shrink-fit chuck, HSK-F 63 short, Clamping range ⌀ D1: 18mm
Article no.: 308184 18
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, axially concentric | |
| Cooling lubricant | yes | |
| Interface position | on the machine; on the workpiece | |
| Holder type | hollow shank taper HSK; plain shank | |
| Interface coding | HSK06300495; ZYL01800115 | |
| Holder shape | plain shank | |
| Holder version | metric; metric | |
| Holder size, metric | 63 mm; 18 mm | |
| Shank diameter DS | 18 mm | |
| Min. clamping diameter D1 | 18 mm | |
| Max. clamping diameter D1 | 18 mm | |
| Gauge length A | 95 mm | |
| External diameter, on the tool side D | 40 mm | |
| Concentricity | 3 µm | |
| Balance quality G at rotational speed | G 2,5 bei 25000 min-1 | |
| Machining strategy | HPC; HSC | |
| Format | short | |
| Including length adjustment screw | yes | |
| Adjustment travel V | 10 mm | |
| With tapped holes for balancing | no | |
| External diameter, 2 on the tool side D2 | 33 mm | |
| Interface | joint 1; joint 2 | |
| Type of product | shrink-fit chuck | |
| Overall length L | 120 mm | |
| Standard | DIN 69893; ISO 12164-1 | |
| Shape | F | |
| With thread | no | |
| With hole for RFID data carrier | yes | |
| Through-coolant available | yes | |
| Material | steel | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 308184 18 | |
| EAN / GTIN | 4045197588050 | |
| Manufacturer number | 308184 18 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- High-temperature steel.
- Sizes 3 − 5 for carbide, from size 6 for HSS and carbide.
- With RFID/Balluffchip bore.
GARANT: HSK mating faces machined. All shanks hard turned (for smooth running!).
Without tapped holes for balancing screws and without thread for coolant pipe.
Integral length adjustment of the tool from clamping ⌀ D1 6 mm (adjustment travel 10 mm).
Application:
- For holding end mills and drills with parallel shank to h6 tolerance.
- Suitable for inductive, contact and hot air shrink-fit units.
Supplied with:
For chucks with length adjustment including a length adjustment screw (from clamping ⌀ D1 6 mm).