{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Shrink-fit chuck with cooling channel bores, SK 50 short, Clamping range ⌀ D1: 12mm
Article no.: 302292 12
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Coolant hole can be plugged | yes | |
| Entry of cooling lubricant | with cooling lubricant entry, radially before holder | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Holder type | iSO taper | |
| Interface coding | SKG05001795 | |
| Holder shape | flat surface contact, standard taper form A | |
| Holder version | dimensionless nominal size with cooling | |
| Holder size, no dimensions | 0500 | |
| Type of mounting | spigot | |
| Interface on machine side | SK 50 | |
| Min. clamping diameter | 12 mm | |
| Max. clamping diameter | 12 mm | |
| Gauge length | 80 mm | |
| External diameter, tool-end | 31.4 mm | |
| Concentricity | 3 µm | |
| Balance quality G at rotational speed | g 2.5 at 25,000 rpm | |
| Machining strategy | HPC; HSC | |
| Format | short | |
| With cooling channel bore | yes | |
| Coolant channel bore can be plugged | yes | |
| Interface | joint 1; joint 2 | |
| Type of product | shrink-fit chuck | |
| Overall length | 181.75 mm | |
| Overall height | 31.4 mm | |
| Overall width | 31.4 mm | |
| Standard | ISO 7388-1 | |
| Shape | ADB | |
| With hole for RFID data carrier | yes | |
| Through-coolant available | yes | |
| Material | steel | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 302292 12 | |
| EAN / GTIN | 4045197288516 | |
| Manufacturer number | 302292 12 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- High-temperature steel.
- Size 3 -5 for carbide, from size 6 for HSS and carbide.
- All shanks hard turned (for smooth running!).
- With RFID/Balluffchip bore.
With coolant hole bores tapped for plugging.
Coolant hole bores at clamping ⌀ D1: 3, 4 and 5 mm cannot be plugged.
Application:
For clamping tools with parallel shank to h6 tolerance.
Suitable for inductive, contact, and hot-air shrink units.
Suitable for inductive, contact, and hot-air shrink units.