{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Shrink-fit chuck with cooling channel bores, SK 40 ultra short, Clamping range ⌀ D1: 10mm
Article no.: 302230 10
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Coolant hole can be plugged | yes | |
| Entry of cooling lubricant | with cooling lubricant entry, radially before holder | |
| Escape of cooling lubricant | with cooling lubricant exit, axially concentric | |
| Cooling lubricant | yes | |
| Holder type | iSO taper | |
| Holder shape | flat surface contact, standard taper form A | |
| Holder version | dimensionless nominal size without cooling | |
| Holder size, no dimensions | 40 | |
| Type of mounting | spigot | |
| Interface on machine side | SK 40 | |
| Min. clamping diameter | 10 mm | |
| Max. clamping diameter | 10 mm | |
| Gauge length | 65 mm | |
| External diameter, tool-end | 33 mm | |
| Body length (tool side) | 31.9 mm | |
| Concentricity | 3 µm | |
| Balance quality G at rotational speed | g 2.5 at 25,000 rpm | |
| Machining strategy | HPC; HSC | |
| Format | ultra-short | |
| Incl. length adjustment screw | no | |
| Incl. RFID data carrier | no | |
| With cooling channel bore | yes | |
| Coolant channel bore can be plugged | yes | |
| Interface | joint 1; joint 2 | |
| Type of product | shrink-fit chuck | |
| Overall height | 63.55 mm | |
| Overall width | 63.55 mm | |
| Standard | ISO 7388-1 | |
| Shape | ADB | |
| With hole for RFID data carrier | yes | |
| Through-coolant available | yes | |
| Material | steel | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 302230 10 | |
| EAN / GTIN | 4045197467652 | |
| Manufacturer number | 302230 10 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- High-temperature steel.
- Size 3 -5 for carbide, from size 6 for HSS and carbide.
- All shanks hard turned (for smooth running!).
- With RFID / Balluffchip bore.
Ultra-short version for more stability and less vibration.
With coolant hole bores tapped for plugging.
Coolant hole bores at clamping ⌀ D1: 3, 4 and 5 mm cannot be plugged.
This results in a longer tool life and better surface qualities. Without length adjustment screw.
Application:
For clamping tools with parallel shank to h6 tolerance.
Suitable for inductive, contact, and hot-air shrink units.
Suitable for inductive, contact, and hot-air shrink units.
Optional extras:
Pull studs (PS) No. 308600 − 308800. PS wrenches No. 308820 – 308835, Shrink-fit chuck extensions No. 302410 − 302419. Shrink-fit units, accessories No. 354210 − 354450, balancing screws set No. 309906 size 180.
Note:
No length adjustment available.