{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for turning DCGT 11T301, for finish machining
Article no.: 260384 PR1725
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | DCGT 11T301 | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | rhombic | |
| Insert width | 9.525 mm | |
| Blade thickness | 3.97 mm | |
| Insert length | 11.6 mm | |
| Insert version | neutral | |
| Cutting edge length | 11.6 mm | |
| Cutting edge height | 3.97 mm | |
| Insert diameter | 9.525 mm | |
| Corner radius | 0.1 mm | |
| Corner angle | 55 degrees | |
| Rake face chamfer width | 0 mm | |
| Rake face chamfer angle | 0 degrees | |
| Rake angle | 11 degrees | |
| Setting angle | 0 degrees | |
| Normal clearance angle (main cutting edge) | 7 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| ISO-Code | DCGT 11T301 | |
| Attachment hole diameter | 4.7 mm | |
| Tool material | Carbide | |
| Machining group | M (stainless steel); P (steel) | |
| Cutting media, manufacturer’s designation | PR1725 | |
| Grade | PR1725 | |
| Insert thickness | 3.97 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | DC11T3013N | |
| Interface coding for insert according to ISO TS 13399-60 | DC11T3013N | |
| Insert designation | DCGT11T301 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 2 pcs. | |
| Direction of action | neutral | |
| Suitable for material | stainless steel (M); steel (P) | |
| Tolerance Class | G | |
| Machining method | grooving and parting off (EEA) | |
| Finishing / roughing assignment | Finishing | |
| Facility for resharpening | no | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | interrupted | |
| Weight | 23 g | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 260384 PR1725 | |
| EAN / GTIN | 4960664923434 | |
| Manufacturer number | DCGT11T301MFP-SKS | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
P
P
P
P
P
M
M
