{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for turning CC.T 09T304, for finish machining
Article no.: 260097 CCX
Article code:
Product details
Technical Data
| Number of teeth | 2 pcs. | |
| Cutter version | rounded (E) | |
| Machining group | P (steel) | |
| Corner radius R | 0.4 mm | |
| Coating | coated | |
| Tolerance Class | M | |
| Type of chip breaker | PP | |
| Base form | rhombic | |
| Thickness of insert S | 3.97 mm | |
| Length of cutting edge l | 9.7 mm | |
| Diameter of insert d | 9.525 mm | |
| Corner angle | 80 degrees | |
| Rake angle | 15 degrees | |
| ISO-Code | CCMT 09T304 | |
| Cutting depth, recommended working area, min. | 0.1 mm | |
| Cutting depth, recommended working area, max. ap max | 0.8 mm | |
| Cutting depth ap, min. | 0.25 mm | |
| Cutting depth ap, max. | 3.25 mm | |
| Cutting speed, main application, min. | 120 m/min | |
| Cutting speed, main application, max. | 310 m/min | |
| Min. feed rate fz | 0.05 mm | |
| Max. feed rate fz | 0.3 mm | |
| Insert thickness T | 3.97 mm | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Direction of action | neutral | |
| Suitable for material | steel (P) | |
| Finishing / roughing assignment | finishing | |
| Type of fastening | hole | |
| Chip breaker | yes | |
| Cutting conditions | continuous | |
| Number of potential uses | 2 pcs. | |
| Weight | 20 g |
Identification & Classification
| Article number | 260097 CCX | |
| EAN / GTIN | 4960664911226 | |
| Manufacturer number | TMJ40004 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
P
P
P
P
P
K
