{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for turning VNGA 160408, ceramic (0°)
Article no.: 255761 HART
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Wet minimum | suitable only under restricted conditions | |
| Wet maximum | suitable only under restricted conditions | |
| Manufacturer’s designation | VNGA 160408 | |
| Dry machining | suitable | |
| Oil | unsuitable | |
| Air | suitable | |
| Base form | rhombic | |
| Wide insert | 16 mm | |
| Thickness of the insert | 4.76 mm | |
| Length of cutting insert | 16 mm | |
| Insert version | neutral | |
| Length of cutting edge | 16 mm | |
| Height of cutting edge | 4.76 mm | |
| Diameter of the cutting insert | 9.525 mm | |
| Corner radius | 0.8 mm | |
| Corner angle | 35 degrees | |
| Rake face chamfer width | 0.2 mm | |
| Rake face chamfer angle | 25 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Cutting conditions | continuous | |
| ISO-Code | VNGA 160408 | |
| Tool material | HC | |
| Machining group | H (hard materials) | |
| Tool application group | KB7205 | |
| Cutting media, manufacturer’s designation | KB7205 | |
| Coating | PVD | |
| Grade | KB7205 | |
| Insert thickness | 4.76 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | VN1604082N | |
| Interface coding for insert according to ISO TS 13399-60 | VN1604082N | |
| Insert designation | VNGA 160408 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 4 pcs. | |
| Direction of action | neutral | |
| Suitable for material | hardened steel (H) | |
| Tolerance Class | G | |
| Machining method | grooving and parting off (EEA) | |
| Finishing / roughing assignment | Finishing | |
| Chip breaker | no | |
| Cutter version | chamfered (T) | |
| Cutting conditions | continuous | |
| Number of potential uses | 4 pcs. | |
| Weight | 4 g | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 255761 HART | |
| EAN / GTIN | 4045197511638 | |
| Manufacturer number | 255761 HART | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
H
H
H
K
N
Description
Version:
High quality, high-temperature ceramic tool material for reliable operation on materials that are hard and difficult to machine.
Coated aluminium oxide titanium carbide ceramic for machining hard materials up to 68 HRC.
Coated aluminium oxide titanium carbide ceramic for machining hard materials up to 68 HRC.