{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling BDMT 11T320 ER-JT, for indexable milling cutters, PR1825
Article no.: 227348 ST1400
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | BDMT 11T320 ER-JT; ST1400 | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable | |
| Base form | pentagonal | |
| Insert width | 6.7 mm | |
| Blade thickness | 3.8 mm | |
| Insert length | 11 mm | |
| Insert version | right-hand | |
| Cutting edge length | 11 mm | |
| Corner radius | 2 mm | |
| Corner chamfer length | 1.4 mm | |
| Corner chamfer angle | 90 degrees | |
| Corner angle | 80 degrees | |
| Rake face chamfer width | 0 mm | |
| Rake face chamfer angle | 0 degrees | |
| Rake angle | 15 degrees | |
| Setting angle | 0 degrees | |
| Normal clearance angle (main cutting edge) | 18 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| Radius of main cutting edge | 0 mm | |
| Cutting conditions | continuous | |
| ISO-Code | BDMT 11T320 ER-JT | |
| Attachment hole diameter | 3.8 mm | |
| Type of chip breaker | S | |
| Tool material | Carbide | |
| Machining group | P (steel) | |
| Tool application group | HOG | |
| Cutting media, manufacturer’s designation | PR1825 | |
| Coating | AlTiN | |
| Insert thickness | 3.97 mm | |
| Type of fastening for insert | M (with cyl. hole clamped from above and via the hole) | |
| Interface coding for insert | BDMT 11T320 ER-JT | |
| Interface coding for insert according to ISO TS 13399-60 | BDMT 11T320 ER-JT | |
| Insert designation | BDMT11T320 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 2 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | steel (P) | |
| Tolerance Class | M | |
| Machining method | shoulder milling (FEC) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | continuous | |
| Weight | 3 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 227348 ST1400 | |
| EAN / GTIN | 4960664027934 | |
| Manufacturer number | BDMT11T320ER-JTPR1825 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
P
200
P
180
P
180
P
140
P
140
M
180
M
180
Description
Note:
Standard application values for ae = 0.3×D. Exactly 90° up to ap = 5.5 mm.