{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling SOMT 083604 PDER, for Softcut® HSI, HB8630
Article no.: 214935 INOX
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Series | Softcut® HSI | |
| Manufacturer’s designation | SOMT 083604 PDER | |
| Base form | square | |
| Wide insert B | 8 mm | |
| Thickness of the insert S | 3.6 mm | |
| Length of cutting insert L | 8 mm | |
| Insert version | right-hand | |
| Length of cutting edge l | 8 mm | |
| Diameter of the cutting insert d | 8 mm | |
| Corner radius R | 0.4 mm | |
| Corner angle | 90 degrees | |
| Rake angle | 20 degrees | |
| Setting angle | 90 degrees | |
| Normal clearance angle (main cutting edge) | 17 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 17 degrees | |
| Normal clearance angle (flat cutting edge) | 17 degrees | |
| Cutting conditions | interrupted | |
| Cutting edge length, limited | 6 mm | |
| ISO-Code | SOMT 083604 PDER | |
| Type of chip breaker | PP | |
| Tool material | Carbide | |
| Machining group | M (stainless steel) | |
| Tool application group | HOG | |
| Cutting media, manufacturer’s designation | HB8630 | |
| Coating | TiAlN | |
| Grade | HB8630 | |
| Insert thickness T | 3.6 mm | |
| Type of fastening for insert | M (with cyl. hole clamped from above and via the hole) | |
| Interface coding for insert | SO0836043R | |
| Interface coding for insert according to ISO TS 13399-60 | SO0836043R | |
| Insert designation | SOMT 083604 PDER | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 4 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | stainless steel (M) | |
| Tolerance Class | M | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | chamfered (T) | |
| Cutting conditions | interrupted | |
| Number of potential uses | 4 pcs. | |
| Weight | 2 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 214935 INOX | |
| EAN / GTIN | 4045197747860 | |
| Manufacturer number | 214935 INOX | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
M
150
M
120
Description
Version:
Increased insert thickness permits markedly deep trough geometry for positive cutting action, and minimises the susceptibility to fracture.
Note:
Standard application values for ae = 0.3×D.