{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling SEKA 1204 AFTN, for face mills, HB7710
Article no.: 214340 GG
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | SEKA 1204 AFTN | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | square | |
| Insert width | 12.7 mm | |
| Blade thickness | 4.76 mm | |
| Insert length | 12.7 mm | |
| Insert version | neutral | |
| Cutting edge length | 12.7 mm | |
| Corner radius | 2.66 mm | |
| Corner chamfer length | 0 mm | |
| Corner chamfer angle | 45 degrees | |
| Corner angle | 90 degrees | |
| Normal clearance angle (main cutting edge) | 20 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 25 degrees | |
| ISO-Code | SEKA 1204 AFTN | |
| Tool material | Carbide | |
| Coating | coated | |
| Grade | HB7710 | |
| Insert thickness | 4.76 mm | |
| Type of fastening for insert | M (with cyl. hole clamped from above and via the hole) | |
| Interface coding for insert | SE1204AF2N | |
| Insert designation | SEKA 1204 AFTN | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 4 pcs. | |
| Direction of action | neutral | |
| Suitable for material | cast iron (K) | |
| Tolerance Class | K | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | continuous | |
| Number of potential uses | 4 pcs. | |
| Weight | 7 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 214340 GG | |
| EAN / GTIN | 4045197319456 | |
| Manufacturer number | 214340 GG | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
K
200
Description
Note:
Standard application values for ae = 0.5 ... 1×D / ap max = 3.5 mm.