{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT Diabolo solid carbide ball nose end mill HPC, TiAlN, ⌀ f8 DC / DS: 9mm
Article no.: 207472 9
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Series | Diabolo | |
| Wet maximum | suitable | |
| Manufacturer’s designation | GARANT Diabolo VHM-Vollradiusfräser | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Interface coding | ZYL01000105 | |
| Holder shape | Standard | |
| Holder version | metric | |
| Holder size, metric | 0100 mm | |
| Dry machining | suitable only under restricted conditions | |
| Type of mounting | spigot | |
| Holder tolerance class | h$06 | |
| Shank diameter | 10 mm | |
| Shank length | 50.2 mm | |
| Holder diameter, upper dimension | 0 mm | |
| Holder diameter, lower dimension | -0.009 mm | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Tool material | solid carbide | |
| Standard designation for cutting medium, 2nd Priority | solid carbide | |
| Standard designation for cutting medium, 3rd Priority | solid carbide | |
| Machining group, manufacturer-specific | H | |
| Cutting media, manufacturer’s designation | VHM TIALN | |
| Coating | TiAlN | |
| Cutter diameter | 9 mm | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance Class | f8 | |
| Neck shape | cylindrical | |
| Cutting edge length | 14 mm | |
| Shoulder length | 14 mm | |
| ISO milling cutter type | L | |
| Number of effective cutters, peripheral side | 4 | |
| Number of effective cutters, end face | 4 | |
| Twist direction | right-hand | |
| Twist angle | 30 degrees | |
| Helical pitch | 30 mm | |
| Corner / edge | 1 | |
| Corner version | as radius | |
| Corner radius | 4.5 mm | |
| Radius | 4.5 mm | |
| Tolerance of radius contour | ±0,05 | |
| Spacing of the cutters | the same | |
| Direction of infeed | horizontal, oblique and vertical | |
| Number of clamping slots | 4 | |
| Interface | joint 1 | |
| Gauge length | 20 mm | |
| Usable length | 14 mm | |
| Overall length | 67 mm | |
| Functional length | 20 mm | |
| Max. speed | 25,000 min-1 | |
| Weight | 71 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | Werksnorm | |
| Data carriers | without data carrier | |
| Machining method | form milling (die milling) | |
| Colour ring | red | |
| Machining strategy | HPC | |
| Type of product | die milling cutter | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.01 mm | |
| Max. cutting depth | 14 mm; 0.45 mm |
Identification & Classification
| Article number | 207472 9 | |
| EAN / GTIN | 4045197600615 | |
| Manufacturer number | 207472 9 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
200
H
190
H
170
H
150
H
110
Description
Version:
GARANT Diabolo:
Special geometry, newly developed coating and carbide for hard machining. 4 centre cutting edges to the centre. Therefore can be used as a true 4-edge drill at all depths of cut.
Tolerance: Radius contour = ±0.005 mm.
Special geometry, newly developed coating and carbide for hard machining. 4 centre cutting edges to the centre. Therefore can be used as a true 4-edge drill at all depths of cut.
Tolerance: Radius contour = ±0.005 mm.