{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT Master Steel SlotMachine solid carbide roughing end mill HPC / TPC, TiAlN, ⌀ d11 DC: 6mm
Article no.: 205555 6
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Series | Master Steel | |
| Wet maximum | suitable | |
| Manufacturer’s designation | GARANT Master Steel SlotMachine VHM-Schruppfräser | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Holder shape | form B | |
| Holder version | metric | |
| Holder size, metric | 0060 mm | |
| Dry machining | suitable only under restricted conditions | |
| Holder tolerance class | h6 | |
| Shank diameter | 6 mm | |
| Shank length | 36 mm | |
| Holder diameter, ISO tolerance class | 6 mm | |
| Holder diameter, lower dimension | -0.008 mm | |
| Oil | suitable | |
| Shank type | HB | |
| Air | suitable only under restricted conditions | |
| Tool material | solid carbide | |
| Machining group | P (steel) | |
| Cutting media, manufacturer’s designation | VHM ALCRN | |
| Coating | TiAlN | |
| Cutter diameter | 6 mm | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance Class | d11 | |
| Cutting edge length | 24 mm | |
| Head length | 24 mm | |
| Shoulder length | 24 mm | |
| ISO milling cutter type | G | |
| Relief angle | 0 degrees | |
| Side rake angle | 0 degrees | |
| Number of effective cutters, peripheral side | 5 | |
| Number of effective cutters, end face | 5 | |
| Twist direction | right-hand | |
| Twist angle | 42 degrees | |
| Helical pitch | 42 mm | |
| Corner / edge | 1 | |
| Corner version | as chamfer | |
| Corner chamfer width | 0.3 mm | |
| Corner chamfer angle | 45 degrees | |
| Spacing of the cutters | unequal spacing | |
| Cutting arc angle max. | 25.84 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Number of clamping slots | 5 | |
| Interface | joint 1 | |
| Gauge length | 30 mm | |
| Weight | 24 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | Werksnorm | |
| Data carriers | without data carrier | |
| Machining method | shoulder milling (FEC) | |
| Colour ring | green | |
| Machining strategy | TPC | |
| Type of product | shoulder mill | |
| Correction factor fz | 2 | |
| Cutting depth min. | 0.3 mm | |
| Max. cutting depth | 24 mm; 6 mm |
Identification & Classification
| Article number | 205555 6 | |
| EAN / GTIN | 4062406275624 | |
| Manufacturer number | 205555 6 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
180
P
170
P
150
P
130
P
100
M
45
M
30
K
180
Description
Version:
With a new-type knurled profile, optimised for higher feed rates. Improved cutting edge protection thanks to slight edge honing. Tremendous bending strength due to the use of ultra-fine grain substrate.
Advantage:
The tool geometry produces particularly tightly rolled swarf that is discharged via flat chip breaker recesses. As a result, the tool maintains an extremely stable core.
Application:
For roughing machining.
Problem-solver for TPC machining.
Problem-solver for TPC machining.