{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Solid carbide milling cutter TPC, uncoated, ⌀ h6 DC: 6mm
Article no.: 202283 6
Article code:
Product details
Technical Data
| Coating | uncoated | |
| Machining strategy | TPC | |
| Number of effective cutters (peripheral side) Z | 3 | |
| Cutter diameter Dc | 6 mm | |
| Cutting edge length Lc | 31 mm | |
| Overall length L | 76 mm | |
| Diameter of shaft DS | 6 mm | |
| Twist angle | 45 degrees | |
| Tolerance class | h6 | |
| Corner chamfer width | 0.2 mm | |
| Tool material | solid carbide | |
| Gauge length A | 36 mm | |
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Wet minimum | suitable | |
| Max. cutting depth, Side milling | 31 mm | |
| Wet maximum | suitable | |
| Cutting width max. ae | 0,1×D | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL00600105 | |
| Holder shape | plain shank | |
| Holder version | metric | |
| Holder size, metric | 6 mm | |
| Dry machining | suitable only under restricted conditions | |
| Holder tolerance class | h6 | |
| Length of shank LS | 36 mm | |
| Shank type | HA | |
| Air | suitable only under restricted conditions | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | VHM-Fräser TPC | |
| Machining group | N (non-ferrous metals); O (other) | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Recess diameter D1 | 5.7 mm | |
| Balancing quality | G 2,5 | |
| Number of effective cutters (end face) Z | 3 | |
| Twist direction | right-hand | |
| Corner / edge | 1 | |
| Corner version | as chamfer | |
| Corner chamfer angle | 45 degrees | |
| Cutting arc angle max. | 36.87 degrees | |
| Number of chip separators | 2 | |
| Direction of infeed | horizontal, oblique and vertical | |
| Number of clamping slots | 3 | |
| Helix angle characteristic | unequal spacing | |
| Tool application group | W | |
| Cutting media, manufacturer’s designation | VHM | |
| Interface | joint 1 | |
| Tolerance class | h6 | |
| Functional length | 36 mm | |
| Weight | 27 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | Werksnorm | |
| Machining method | shoulder milling (FEC) | |
| Colour ring | yellow | |
| Type of product | shoulder mill | |
| Content | single part | |
| Correction factor fz | 3 | |
| Cutting depth min. | 0.3 mm | |
| Cutting depth in use | Side milling |
Identification & Classification
| Article number | 202283 6 | |
| EAN / GTIN | 4045197977229 | |
| Manufacturer number | 202283 6 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
130
N
100
N
85
N
125
N
90
N
100
N
80
N
70
N
100
N
70
N
90
Description
Version:
Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping aluminium workpieces.
With double chip-breaker for exemplary chip formation.
With double chip-breaker for exemplary chip formation.
Note:
ae max = 0.1×D for TPC machining.
hmax: The values stated in the table are maximum values.
hmax: The values stated in the table are maximum values.