{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Solid carbide milling cutter MTC, DLC, ⌀ h6 DC: 4mm
Article no.: 202274 4
Article code:
Product details
Technical Data
| Coating | DLC | |
| Machining strategy | MTC | |
| Number of effective cutters (peripheral side) Z | 3 | |
| Cutter diameter Dc | 4 mm | |
| Cutting edge length Lc | 6.5 mm | |
| Overall length L | 80 mm | |
| Shank diameter DS | 6 mm | |
| Twist angle | 45 degrees | |
| Tolerance class | h6 | |
| Corner chamfer width | 0.1 mm | |
| Tool material | solid carbide | |
| Gauge length A | 24 mm | |
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Wet minimum | suitable | |
| Vorschub pro Zahn Besäumen fz | 0.02 mm | |
| Max. cutting depth, Full slot milling | 2 mm | |
| Max. cutting depth, Side milling | 6.5 mm | |
| Wet maximum | suitable | |
| Vorschub pro Zahn Nutenfräsen fz | 0.015 mm | |
| Eingriffsbreite max. ae | 1×D; 0,3×D | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL00600105 | |
| Holder shape | plain shank | |
| Holder version | metric | |
| Holder size, metric | 6 mm | |
| Dry machining | suitable only under restricted conditions | |
| Holder tolerance class | h6 | |
| Arbor size | 6 | |
| Length of shank LS | 54.8 mm | |
| Shank type | HA | |
| Air | suitable only under restricted conditions | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | VHM-Fräser MTC, DLC | |
| Machining group | N (non-ferrous metals); O (other) | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Recess diameter D1 | 3.7 mm | |
| Balancing quality | G 2,5 | |
| Number of effective cutters (end face) Z | 3 | |
| Twist direction | right-hand | |
| Corner / edge | 1 | |
| Corner version | as chamfer | |
| Corner chamfer angle | 45 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Number of clamping slots | 3 | |
| Helix angle characteristic | unequal spacing | |
| Tool application group | W | |
| Cutting media, manufacturer’s designation | VHM | |
| Vorschub pro Zahn in | alu short-chipping | |
| Interface | joint 1 | |
| Tolerance class | h6 | |
| Functional length | 6.5 mm | |
| Weight | 28 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | Werksnorm | |
| Machining method | shoulder milling (FEC); slot milling (FNU) | |
| Colour ring | yellow | |
| Type of product | shoulder mill | |
| Content | single part | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.1 mm | |
| Cutting depth in use | Full slot milling; Side milling |
Identification & Classification
| Article number | 202274 4 | |
| EAN / GTIN | 4045197655073 | |
| Manufacturer number | 202274 4 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
440
N
400
N
360
N
180
N
150
N
180
N
140
N
120
N
170
N
150
N
140
N
120
N
150
N
280
N
150
N
190
Description
Version:
With the latest generation of DLC coating sp2.
Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping aluminium components.
Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping aluminium components.
Application:
Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres.
Note:
NEW GENERATION AVAILABLE!
Recommended successor product is No. 202017.
Recommended successor product is No. 202017.