{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Solid carbide mini slot drill, TiAlN, ⌀ e8 DC: 1mm
Article no.: 201920 1
Article code:
Product details
Technical Data
| Coating | TiAlN | |
| Number of effective cutters (peripheral side) Z | 3 | |
| Cutter diameter Dc | 1 mm | |
| Cutting edge length Lc | 2 mm | |
| Overall length L | 38 mm | |
| Shank diameter DS | 3 mm | |
| Twist angle | 45 degrees | |
| Tolerance class | e8 | |
| Max. cutting depth L2 | 2 mm; 0.5 mm | |
| Corner chamfer width | 0.02 mm | |
| Tool material | solid carbide | |
| Gauge length A | 13 mm | |
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | no | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL00300105 | |
| Holder tolerance class | h6 | |
| Length of shank LS | 26 mm | |
| Shank type | HA | |
| Cutting media, manufacturer’s designation | VHM | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Head length L3 | 2 mm | |
| ISO milling cutter type | N | |
| Relief angle | 0 degrees | |
| Side rake angle | 0 degrees | |
| Plunge angle | 0 degrees | |
| Plunge depth, max. ap | 0 mm | |
| Number of effective cutters (end face) Z | 3 | |
| Twist direction | right-hand | |
| Corner / edge | 1 | |
| Corner version | as chamfer | |
| Corner chamfer angle | 45 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Number of clamping slots | 3 | |
| Interface | joint 1 | |
| Weight | 4 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | Werksnorm | |
| Machining method | shoulder milling (FEC) | |
| Colour ring | without | |
| Type of product | shoulder mill | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.01 mm |
Identification & Classification
| Article number | 201920 1 | |
| EAN / GTIN | 4045197114754 | |
| Manufacturer number | 201920 1 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
280
N
200
P
120
P
105
P
100
P
70
M
80
M
60
K
90
Description
Version:
Double relief ground side clearance angle. Centre cutting teeth for plunging.
Weldon shank similar to DIN 6535 HB.
Weldon shank similar to DIN 6535 HB.
Note:
Save on regrinding costs:
It is cheaper to use solid carbide mini slot drills to the wear limit than to regrind them.
It is cheaper to use solid carbide mini slot drills to the wear limit than to regrind them.