{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Diabolo solid carbide micro slot drill 1X8 mm
Article no.: 201631 1X8
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: H
- Tolérance ⌀ nominal: 0 / −0,005
- Nombre de dents Z: 2
Product details
Technical Data
| Series | Diabolo | |
| ⌀ dents DC | 1 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | H | |
| Tolérance ⌀ nominal | 0 / −0,005 | |
| Nombre de dents Z | 2 | |
| Angle d'hélice | 30 degré | |
| Direction de l'approche | Horizontal, oblique et vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.1×D for side milling | |
| Queue | DIN 6535 HA avec h5 | |
| Through-coolant | no | |
| Longueur de coupe Lc | 1,5 mm | |
| Longueur de col L1 avec détalonnage | 8 mm | |
| ⌀ de détalonnage D1 | 0,95 mm | |
| Longueur totale L | 45 mm | |
| ⌀ queue Ds | 4 mm | |
| Angle du chanfrein de bec | 90 degré | |
| Avance fz pour le rainurage dans l'acier < 65 HRC | 0,015 mm | |
| Avance fz pour le dressage dans l'acier < 65 HRC | 0,02 mm | |
| Vitesse de coupe vc dans l'acier < 65 HRC | 42 m/min | |
| Facteur de correction ap corr | 0,8 | |
| Colour ring | red | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 201631 1X8 | |
| EAN / GTIN | 4045197932761 |
Application Table
P
200
P
200
P
190
P
170
H
120
H
100
H
72
H
55
H
50
H
45
M
90
M
80
N
140
Description
Version:
GARANT Diabolo:
Special geometry, coating and carbide for hard machining in the high-performance field. Suitable even for machining electrolytic copper. Double-relief ground 2 chamfers hollow ground for high-precision hard machining.
Recess angle α = 16°.
Tolerances:
Special geometry, coating and carbide for hard machining in the high-performance field. Suitable even for machining electrolytic copper. Double-relief ground 2 chamfers hollow ground for high-precision hard machining.
Recess angle α = 16°.
Tolerances:
- Neck ⌀: D1 = 0 / -0.01 mm.
Note:
At greater tool overhang lengths, use a reduced value for ap!
Values for:
slots milled from solid: ap = 0.05×D×ap korr
side milling: ap = 0.1×D×ap korr
To calculate the feed rate vf please use the actual speed of the machine (the maximum possible speed)! e.g: vf = 18000 [rpm]× fz [mm/Z]× z
Values for:
slots milled from solid: ap = 0.05×D×ap korr
side milling: ap = 0.1×D×ap korr
To calculate the feed rate vf please use the actual speed of the machine (the maximum possible speed)! e.g: vf = 18000 [rpm]× fz [mm/Z]× z