{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Roughing end mill, uncoated, ⌀ k12 DC: 30mm
Article no.: 192970 30
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL02001005 | |
| Holder shape | form B | |
| Holder version | metric | |
| Holder size, metric | 20 mm | |
| Dry machining | suitable only under restricted conditions | |
| Type of mounting | spigot | |
| Holder tolerance class | h6 | |
| Shank diameter DS | 20 mm | |
| Shank length LS | 0 mm | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Tool material | HSS Co 10 | |
| Cutting media, manufacturer’s designation | HSS-E | |
| Coating | uncoated | |
| Cutter diameter Dc | 30 mm | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance Class | k12 | |
| Cutting edge length Lc | 30 mm | |
| ISO milling cutter type | end / face mill | |
| Relief angle | 0 degrees | |
| Side rake angle | 0 degrees | |
| Plunge angle | 0 degrees | |
| Plunge depth, max. ap | 0 mm | |
| Number of effective cutters (peripheral side) Z | 5 | |
| Number of effective cutters (end face) Z | 5 | |
| Twist direction | right-hand | |
| Twist angle | 30 degrees | |
| Corner / edge | 1 | |
| Corner version | as chamfer | |
| Corner chamfer width | 0 mm | |
| Corner chamfer angle | 90 degrees | |
| Spacing of the cutters | the same | |
| Direction of infeed | horizontal, oblique and vertical | |
| Interface | joint 1 | |
| Gauge length A | 40 mm | |
| Usable length L1 | 30 mm | |
| Overall length L | 90 mm | |
| Functional length | 40 mm | |
| Weight | 317 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | DIN 4000-82 | |
| Colour ring | without | |
| Machining strategy | HPC | |
| Type of product | shoulder mill | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.01 mm | |
| Max. cutting depth L2 | 15 mm; 30 mm |
Identification & Classification
| Article number | 192970 30 | |
| EAN / GTIN | 4045197109095 | |
| Manufacturer number | 192970 30 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
83
P
28
P
23
P
23
P
12
K
23
N
55
Description
Version:
Relief ground knuckle form profile.
End face recessed. Wide lands permit frequent regrinding without losing the profile.
End face recessed. Wide lands permit frequent regrinding without losing the profile.
Advantage:
For roughing at low cutting depths (predominantly face milling).
Very reliable, due to lower load on the machine spindle.
Very reliable, due to lower load on the machine spindle.