{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Roughing end mill HSS-PM, TiAlN, ⌀ js14 DC: 10mm
Article no.: 192541 10
Article code:
Product details
Technical Data
| Coating | TiAlN | |
| Number of effective cutters (peripheral side) Z | 3 | |
| Cutter diameter Dc | 10 mm | |
| Cutting edge length Lc | 45 mm | |
| Overall length L | 95 mm | |
| Shank diameter DS | 10 mm | |
| Twist angle | 36 degrees | |
| Tolerance class | js14 | |
| Corner chamfer width | 0.5 mm | |
| Tool material | HSS-E-PM | |
| Gauge length A | 55 mm | |
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Max. cutting depth, Full slot milling | 10 mm | |
| Max. cutting depth, Side milling | 45 mm | |
| Wet maximum | suitable | |
| Vorschub pro Zahn Nutenfräsen fz | 0.04 mm | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL01001005 | |
| Holder shape | form B | |
| Holder version | metric | |
| Holder size, metric | 10 mm | |
| Dry machining | suitable | |
| Holder tolerance class | h6 | |
| Length of shank LS | 40 mm | |
| Shank type | HB | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | Schruppfräser | |
| Machining group | N (non-ferrous metals) | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Number of effective cutters (end face) Z | 3 | |
| Twist direction | right-hand | |
| Number of corner versions | 1 | |
| Corner / edge | 1 | |
| Corner version | as chamfer | |
| Corner chamfer angle | 45 degrees | |
| Shape identifier, manufacturer-specific | WR | |
| Direction of infeed | horizontal, oblique and vertical | |
| Number of clamping slots | 3 | |
| Cutting media, manufacturer’s designation | HSS-PM | |
| Vorschub pro Zahn in | alu short-chipping | |
| Interface | joint 1 | |
| Weight | 44 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | DIN 844 B | |
| Shape letter standard number | B | |
| Machining method | countersinking (plunge milling) (FSE); shoulder milling (FEC); slot milling (FNU) | |
| Colour ring | yellow | |
| Type of product | shoulder mill | |
| Content | single part | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.3 mm | |
| Cutting depth in use | Full slot milling; Side milling |
Identification & Classification
| Article number | 192541 10 | |
| EAN / GTIN | 4045197547538 | |
| Manufacturer number | 192541 10 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
138
M
23
Description
Version:
Relief ground knuckle form profile.
Centre cutting teeth for plunging.
For the most demanding metal removal rates.
Centre cutting teeth for plunging.
- Wide, precision ground chip flutes.
- Special chip angle for aluminium and non-ferrous metals.
For the most demanding metal removal rates.
Advantage:
Suitable for high machining volumes due to the large flutes.