{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Slot drill HSS-Co8, uncoated, ⌀ e8 DC: 14mm
Article no.: 191280 14
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Holder shape | form B | |
| Holder version | metric | |
| Holder size, metric | 0120 mm | |
| Type of mounting | spigot | |
| Holder tolerance class | h$06 | |
| Shank diameter | 12 mm | |
| Shank length | 0 mm | |
| Tool material | HSS Co 10 | |
| Cutting media, manufacturer’s designation | HSS-CO8 | |
| Coating | uncoated | |
| Cutter diameter | 14 mm | |
| Tolerance of cutter diameter | manufacturer tolerance | |
| Upper dimension | 0 mm | |
| Cutting edge length | 53 mm | |
| ISO milling cutter type | End / face mill | |
| Relief angle | 0 degrees | |
| Side rake angle | 0 degrees | |
| Number of effective cutters, peripheral side | 3 | |
| Number of effective cutters, end face | 3 | |
| Twist direction | right-hand | |
| Twist angle | 30 degrees | |
| Corner / edge | 1 | |
| Corner version | sharp-edged | |
| Corner chamfer angle | 90 degrees | |
| Spacing of the cutters | the same | |
| Direction of infeed | horizontal, oblique and vertical | |
| Interface | joint 1 | |
| Gauge length | 55 mm | |
| Weight | 92 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | DIN 844 B | |
| Shape letter standard number | B | |
| Machining method | countersinking (plunge milling); slot drilling (keyway cutting); slot milling | |
| Colour ring | without | |
| Type of product | shoulder mill | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.01 mm | |
| Max. cutting depth | 7 mm; 53 mm |
Identification & Classification
| Article number | 191280 14 | |
| EAN / GTIN | 4045197101587 | |
| Manufacturer number | 191280 14 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
83
P
28
P
25
P
23
K
23
N
55
Description
Version:
Centre cutting teeth for plunging.
Eccentric relief ground.
Eccentric relief ground.
Note:
Suitable for use as a slot drill (tolerance e8) or an end mill.
50 % higher metal removal rate than 2 flute slot drills.
Larger flutes than multi-flute end mills (good for soft material). For milling keyways.
50 % higher metal removal rate than 2 flute slot drills.
Larger flutes than multi-flute end mills (good for soft material). For milling keyways.