{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Slot drill, uncoated, ⌀ e8 DC: 8mm
Article no.: 191100 8
Article code:
Product details
Technical Data
| Coating | uncoated | |
| Number of effective cutters (peripheral side) Z | 2 | |
| Cutter diameter Dc | 8 mm | |
| Cutting edge length Lc | 19 mm | |
| Overall length L | 69 mm | |
| Shank diameter DS | 10 mm | |
| Twist angle | 42 degrees | |
| Tolerance class | e8 | |
| Tool material | HSS Co 8 | |
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Wet minimum | suitable | |
| Max. cutting depth, Full slot milling | 8 mm | |
| Wet maximum | suitable | |
| Vorschub pro Zahn Nutenfräsen fz | 0.024 mm | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL01001005 | |
| Holder shape | straight clamping flat | |
| Holder version | metric | |
| Holder size, metric | 10 mm | |
| Holder tolerance class | h6 | |
| Shank type | HB | |
| Cooling lubricant | yes | |
| Machining group | N (non-ferrous metals); P (steel) | |
| Tolerance of cutter diameter | tolerance class ISO | |
| ISO milling cutter type | slot drill | |
| Number of effective cutters (end face) Z | 2 | |
| Twist direction | right-hand | |
| Corner / edge | 1 | |
| Corner chamfer angle | 90 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Number of clamping slots | 2 | |
| Tool application group | W | |
| Cutting media, manufacturer’s designation | HSS-CO8 | |
| Vorschub pro Zahn in | alu short-chipping | |
| Interface | joint 1 | |
| Weight | 38 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | DIN 844 B | |
| Shape letter standard number | B | |
| Machining method | slot drilling (keyway cutting) (FNB); slot milling (FNU) | |
| Colour ring | yellow | |
| Type of product | shoulder mill | |
| Content | single part | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.01 mm | |
| Cutting depth in use | Full slot milling |
Identification & Classification
| Article number | 191100 8 | |
| EAN / GTIN | 4045197100481 | |
| Manufacturer number | 191100 8 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
150
N
37
P
28
Description
Version:
Centre cutting edge geometry for plunging. Wide, fine ground chip flutes. Exceptionally fine component surface finish - due to precisely ground cutting edges. For slots or for milling pockets from the component centre.
Note:
Note! Only for use in climb milling.