{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Slot drill, uncoated, ⌀ e8 DC: 9mm
Article no.: 191080 9
Article code:
Product details
Technical Data
| Coating | uncoated | |
| Number of effective cutters (peripheral side) Z | 2 | |
| Cutter diameter Dc | 9 mm | |
| Cutting edge length Lc | 19 mm | |
| Overall length L | 88 mm | |
| Shank diameter DS | 10 mm | |
| Twist angle | 30 degrees | |
| Tolerance class | e8 | |
| Max. cutting depth L2 | 19 mm; 9 mm | |
| Tool material | HSS | |
| Gauge length A | 48 mm | |
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL01001005 | |
| Holder tolerance class | h6 | |
| Arbor size | 0100 | |
| Length of shank LS | 66.13 mm | |
| Machining group, manufacturer-specific | PNK | |
| Tool application group | N | |
| Cutting media, manufacturer’s designation | HSS Co 8 | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Head length L3 | 20 mm | |
| ISO milling cutter type | G | |
| Relief angle | 2 degrees | |
| Side rake angle | 9 degrees | |
| Number of effective cutters (end face) Z | 2 | |
| Number of central cutting edges | 2 | |
| Twist direction | right-hand | |
| Number of corner versions | 1 | |
| Corner / edge | 1 | |
| Corner version | sharp-edged | |
| Corner chamfer angle | 90 degrees | |
| Spacing of the cutters | the same | |
| Direction of infeed | horizontal, oblique and vertical | |
| Number of clamping slots | 2 | |
| Interface | joint 1 | |
| Usable length L1 | 20 mm | |
| Functional length | 68 mm | |
| Max. speed | 8,000 min-1 | |
| Weight | 50 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | DIN 844 B | |
| Data carriers | without data carrier | |
| Machining method | shoulder milling (FEC); slot drilling (keyway cutting) (FNB); slot milling (FNU) | |
| Colour ring | without | |
| Type of product | shoulder mill | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.01 mm |
Identification & Classification
| Article number | 191080 9 | |
| EAN / GTIN | 4045197100146 | |
| Manufacturer number | 191080 9 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
83
P
28
P
25
P
23
K
23
N
55
Description
Version:
Dimensions to DIN 844 long.
Cutting length to DIN 844 short.
Centre cutting edge geometry for plunging.
Cutting length to DIN 844 short.
Centre cutting edge geometry for plunging.
Application:
For milling keyways (slots) or pockets from the centre of the component.