{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Tyrolit laboratory cut-off wheel 400x3x32 mm A70 A6 B PREMIUM steel/inox
Article no.: 167339
Article code:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Technical Data
| Type of product | Cutting disc |
Identification & Classification
| Article number | 167339 | |
| EAN / GTIN | 9003171673395 | |
| Manufacturer number | 167339 | |
| L-Number | L50140 594 | |
| Manufacturer/responsible person | Tyrolit AG, Swarovskistraße 33, 6130 Schwaz, Austria, www.tyrolit.de |
Description
Description:
- Use PREMIUM laboratory cut-off wheels from Tyrolit to prevent structural changes, deformation of the workpiece or cracks when cutting samples in the laboratory.
- The laboratory cut-off wheels are perfectly suited for wet cutting of laboratory samples in various steel and stainless steel grades in travelling and chop cut.
- Highest performance values with significantly reduced tool wear characterize this product, which clearly optimizes your processes in terms of economy and efficiency.
Feature:
- Max. working speed: 50m/s
- Max. RPM: 2400rpm
- Specification: A80-BM /50
- Main dimension: D x T x H = 400 x 3 x 32
Advantage:
- Cuts samples in a laboratory without structural alterations, workpiece deformation or cracks
- Maximum performance with greatly reduced tool wear
- Clean cutting quality
Application:
- The workpiece must be fixed during machining and the wheel must not be exposed to lateral load
- Soft for 60.5-72.3 HRC
- Medium for 22.0-60.5 HRC
- Hard for 22.0 HRC
- Note maximum operating speed of 50 m/s
Material:
- Steel/Stainless steel
- Steel/Stainless steel
Suitable for:
- Chop saw
Recommendation:
- The workpiece must be fixed during machining and the wheel must not be exposed to lateral load
- Soft for 60.5-72.3 HRC
- Medium for 22.0-60.5 HRC
- Hard for 22.0 HRC
- Note maximum operating speed of 50 m/s
Note:
- For machining different steel and stainless steel grades
- For wet cutting laboratory samples using traverse and chop cuts